KRISHI
ICAR RESEARCH DATA REPOSITORY FOR KNOWLEDGE MANAGEMENT
(An Institutional Publication and Data Inventory Repository)
"Not Available": Please do not remove the default option "Not Available" for the fields where metadata information is not available
"1001-01-01": Date not available or not applicable for filling metadata infromation
"1001-01-01": Date not available or not applicable for filling metadata infromation
Please use this identifier to cite or link to this item:
http://krishi.icar.gov.in/jspui/handle/123456789/55116
Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Ravindra Naik | en_US |
dc.contributor.author | SJK Annamalai | en_US |
dc.date.accessioned | 2021-08-11T11:14:13Z | - |
dc.date.available | 2021-08-11T11:14:13Z | - |
dc.date.issued | 2020-01-01 | - |
dc.identifier.citation | Not Available | en_US |
dc.identifier.issn | Not Available | - |
dc.identifier.uri | http://krishi.icar.gov.in/jspui/handle/123456789/55116 | - |
dc.description | Not Available | en_US |
dc.description.abstract | Continuous feed Aloe vera whole gel extraction equipment comprises of six major components, (a) Outer frame to hold functional components; (b) Conveyor belt; (c) Drive mechanism for gel extraction system; (d) Whole gel extraction mechanism; (e) Collection trays for extracted gel and rinds; (f) Motor. Leaf base and sharp spines of matured Aloe vera leaves are removed before feeding into equipment. Combination action of sliding bearing (4 numbers) mechanism and pressure springs (4 numbers) helps to adjust gap between pressure roller assembly and flatten curvature of Aloe vera leaves. Two high carbon steel blades one each, just above bottom set of rollers and just below top set of rollers, simultaneous peels off both top and bottom rind in a single pass. To obtain whole gel recovery of more than 98.13 ± 0.52 % and residual gel percentage of below 1.87 ± 0.27%, speed of the rollers was optimized at 100 rpm for three levels of leaves thickness (<25 mm, 25–30 mm and >30 mm). Capacity of equipment is 215.00 ± 9.08 kg/h. Percentage saving in cost and time of operation is 55.56 and 70 %, respectively. Quality parameters of whole Aloe vera gel were at par with preferred hand filleting method of gel extraction. Equipment is suitable to be adopted as a rural technology specially in the Aloe vera catchment area. | en_US |
dc.description.sponsorship | ICAR | en_US |
dc.language.iso | English | en_US |
dc.publisher | Not Available | en_US |
dc.relation.ispartofseries | Not Available; | - |
dc.subject | Aloe vera, Gel extraction efficiency, Hand filleting, Quality parameters | en_US |
dc.title | Development of Continuous Feed Equipment for Aloe Vera Whole Gel Extraction | en_US |
dc.title.alternative | Not Available | en_US |
dc.type | Article | en_US |
dc.publication.projectcode | Not Available | en_US |
dc.publication.journalname | Journal of Scientific and Industrial Research | en_US |
dc.publication.volumeno | 79 | en_US |
dc.publication.pagenumber | 971-979 | en_US |
dc.publication.divisionUnit | ICAR CIAE Bhopal | en_US |
dc.publication.sourceUrl | Not Available | en_US |
dc.publication.authorAffiliation | ICAR::Central Institute of Agricultural Engineering | en_US |
dc.ICARdataUseLicence | http://krishi.icar.gov.in/PDF/ICAR_Data_Use_Licence.pdf | en_US |
dc.publication.journaltype | Research Paper | en_US |
dc.publication.naasrating | 6.73 | en_US |
dc.publication.naasrating | 6.73 | - |
Appears in Collections: | AEng-CIAE-Publication |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
Ravindra Naik _ALOEVERA _34929-465538803-1-PB.pdf | 445.54 kB | Adobe PDF | View/Open |
Items in KRISHI are protected by copyright, with all rights reserved, unless otherwise indicated.