KRISHI
ICAR RESEARCH DATA REPOSITORY FOR KNOWLEDGE MANAGEMENT
(An Institutional Publication and Data Inventory Repository)
"Not Available": Please do not remove the default option "Not Available" for the fields where metadata information is not available
"1001-01-01": Date not available or not applicable for filling metadata infromation
"1001-01-01": Date not available or not applicable for filling metadata infromation
Please use this identifier to cite or link to this item:
http://krishi.icar.gov.in/jspui/handle/123456789/58771Full metadata record
| DC Field | Value | Language |
|---|---|---|
| dc.contributor.author | Singh Dushyant | en_US |
| dc.contributor.author | Saxena AC | en_US |
| dc.date.accessioned | 2021-08-19T05:31:09Z | - |
| dc.date.available | 2021-08-19T05:31:09Z | - |
| dc.date.issued | 2008-01-01 | - |
| dc.identifier.citation | Not Available | en_US |
| dc.identifier.issn | Not Available | - |
| dc.identifier.uri | http://krishi.icar.gov.in/jspui/handle/123456789/58771 | - |
| dc.description | Not Available | en_US |
| dc.description.abstract | The soil working components of agricultural machinery faces serious problem of abrasive wear. The study was conducted to investigate synergic effect of heat-treatment and shot-peening on medium carbon steel with small percentage of Boron (50B50 steel). Three heat treatment cycles (annealing, inter critical annealing, quenching and tempering) were done to obtain different material property combinations. Shot peening was done at different intensities (0.17A to 0.47A) on heat-treated specimens. Low stress abrasion wear behaviour of these steel specimens was investigated by rubber wheel dry sand abrasion tester confirming to ASTM G-65 standards. The results indicated that shot peening operation decreased the wear rate of soft as well as hard surfaces and improved the wear resistance when the peening intensity was restricted to a critical value of 0.37A. | en_US |
| dc.description.sponsorship | Not Available | en_US |
| dc.language.iso | English | en_US |
| dc.publisher | Not Available | en_US |
| dc.relation.ispartofseries | Not Available; | - |
| dc.subject | Heat Treatment and Shot Peening | en_US |
| dc.title | Effect of heat-treatment and shot peening on low stress abrasive wear behaviour of medium carbon steel | en_US |
| dc.title.alternative | Not Available | en_US |
| dc.type | Article | en_US |
| dc.publication.projectcode | Not Available | en_US |
| dc.publication.journalname | Journal of Agricultural Engineering (ISAE) | en_US |
| dc.publication.volumeno | 45(2) | en_US |
| dc.publication.pagenumber | 48-53 | en_US |
| dc.publication.divisionUnit | Not Available | en_US |
| dc.publication.sourceUrl | Not Available | en_US |
| dc.publication.authorAffiliation | ICAR-CIAE | en_US |
| dc.publication.authorAffiliation | ICAR-CIAE | en_US |
| dc.ICARdataUseLicence | http://krishi.icar.gov.in/PDF/ICAR_Data_Use_Licence.pdf | en_US |
| dc.publication.naasrating | 4.79 | - |
| Appears in Collections: | AEng-CIAE-Publication | |
Files in This Item:
| File | Description | Size | Format | |
|---|---|---|---|---|
| Effect ofHeat-Treatment and Shot Peening on Low Stress.pdf | 580.42 kB | Adobe PDF | View/Open |
Items in KRISHI are protected by copyright, with all rights reserved, unless otherwise indicated.