KRISHI
ICAR RESEARCH DATA REPOSITORY FOR KNOWLEDGE MANAGEMENT
(An Institutional Publication and Data Inventory Repository)
"Not Available": Please do not remove the default option "Not Available" for the fields where metadata information is not available
"1001-01-01": Date not available or not applicable for filling metadata infromation
"1001-01-01": Date not available or not applicable for filling metadata infromation
Please use this identifier to cite or link to this item:
http://krishi.icar.gov.in/jspui/handle/123456789/18518
Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Dilip Jain | en_US |
dc.contributor.author | Siddhant Jain | en_US |
dc.date.accessioned | 2019-04-12T09:46:04Z | - |
dc.date.available | 2019-04-12T09:46:04Z | - |
dc.date.issued | 2015-03-01 | - |
dc.identifier.citation | Not Available | en_US |
dc.identifier.issn | Not Available | - |
dc.identifier.uri | http://krishi.icar.gov.in/jspui/handle/123456789/18518 | - |
dc.description | Not Available | en_US |
dc.description.abstract | Mechanical designing of screw-press for obtaining optimum flow and pressure will be very costly affair. The flow velocity and pressure was predicted using an analytical solution of an isothermal Newtonian flow in finite screw channel. An innovative design of continuous spiral screw was developed for screw-press oil expeller. The flow velocities in the down channel range from 125 to 175 mm/s through the length of screw from 150 to 500 mm for the screw drive of 48 rpm. The maximum pressure was built at the end of screw in the range of 9 - 10.57 x 105 Pa. The theoretical pressure was close to the pressure measured during experiments for mustard and sunflower oilseed expelling. The lower screw speed resulted low heat generation and higher oil recovery. | en_US |
dc.description.sponsorship | Not Available | en_US |
dc.language.iso | English | en_US |
dc.publisher | CIGR | en_US |
dc.relation.ispartofseries | Not Available; | - |
dc.subject | Oil expeller | en_US |
dc.subject | Screw design | en_US |
dc.subject | Flow profile | en_US |
dc.subject | Pressure profile | en_US |
dc.title | Performance evaluation of screw-press oil expeller using a continuous spiral and decreasing length of pitch of screw | en_US |
dc.title.alternative | Not Available | en_US |
dc.type | Research Paper | en_US |
dc.publication.projectcode | Not Available | en_US |
dc.publication.journalname | Agricultural Engineering International: CIGR Journal | en_US |
dc.publication.volumeno | 17(1) | en_US |
dc.publication.pagenumber | 213-222 | en_US |
dc.publication.divisionUnit | Agricultural Engineering and Renewable Energy | en_US |
dc.publication.sourceUrl | http://www.cigrjournal.org | en_US |
dc.publication.authorAffiliation | ICAR:Central Arid Zone Research Institute | en_US |
dc.ICARdataUseLicence | http://krishi.icar.gov.in/PDF/ICAR_Data_Use_Licence.pdf | en_US |
Appears in Collections: | NRM-CAZRI-Publication |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
Screw_Press_CIGR.pdf | 546.54 kB | Adobe PDF | View/Open |
Items in KRISHI are protected by copyright, with all rights reserved, unless otherwise indicated.