KRISHI
ICAR RESEARCH DATA REPOSITORY FOR KNOWLEDGE MANAGEMENT
(An Institutional Publication and Data Inventory Repository)
"Not Available": Please do not remove the default option "Not Available" for the fields where metadata information is not available
"1001-01-01": Date not available or not applicable for filling metadata infromation
"1001-01-01": Date not available or not applicable for filling metadata infromation
Please use this identifier to cite or link to this item:
http://krishi.icar.gov.in/jspui/handle/123456789/47905
Title: | Blade and operational parameters on shredding efficiency on cotton in experimental cotton stalk shredder |
Other Titles: | Not Available |
Authors: | Senthilkumar, T., R.Manian and K.Kathirvel |
ICAR Data Use Licennce: | http://krishi.icar.gov.in/PDF/ICAR_Data_Use_Licence.pdf |
Author's Affiliated institute: | ICAR: Central Institute of Agricultural Engineering |
Published/ Complete Date: | 2010-09 |
Project Code: | Not Available |
Keywords: | cotton shredder, shredding efficiency, blade parameters |
Publisher: | Not Available |
Citation: | Senthilkumar, T., R.Manian and K.Kathirvel. 2010. Blade and operational parameters on shredding efficiency on cotton in experimental cotton stalk shredder. Madras Agric. J., 97 (79):304-307 |
Series/Report no.: | Not Available; |
Abstract/Description: | The influence of the selected level of variables of three levels of number of blades viz. 2, 3 and 4, four levels of peripheral velocity viz. 21.52, 23.80, 26.58 and 28.60 ms-1, three levels of blade thickness of 2, 4 and 6 mm and four levels of blade rake angle of 0, 15, 30 and 45 degree on shredding efficiency in terms of length of cut of cotton stalk was investigated. The revealed that increase in peripheral velocity from 21.52 to 28.60 ms-1 resulted in decreased length of cut. The lowest value of length of cut of 113.83 mm was observed at the shredder with 2 blades, 0 degree blade rake angle and 28.60 ms-1 peripheral velocity. At 0 degree blade rake angle, the length of cut of shredded cotton stalk was much lower than other blade rake angles at 6mm blade thickness. Increase in number of blades from 2 to 4 resulted in increased length of cut for all the levels of blade rake angle. Increase in blade rake angle from 0 to 45 degree resulted in increased length of cut for all the levels of peripheral velocity and number of blades. 2 blades with 0° blade rake angle, 6 mm blade thickness and 28.60 ms-1 peripheral velocity recorded lowest value of length of cut than other combinations |
Description: | Not Available |
ISSN: | Not Available |
Type(s) of content: | Research Paper |
Sponsors: | Not Available |
Language: | English |
Name of Journal: | Madras Agricultural Journal |
NAAS Rating: | 4.52 4.52 |
Volume No.: | 97 (79) |
Page Number: | 304-307 |
Name of the Division/Regional Station: | Regional Centre, Coimbatore |
Source, DOI or any other URL: | Not Available |
URI: | http://krishi.icar.gov.in/jspui/handle/123456789/47905 |
Appears in Collections: | AEng-CIAE-Publication |
Items in KRISHI are protected by copyright, with all rights reserved, unless otherwise indicated.