KRISHI
ICAR RESEARCH DATA REPOSITORY FOR KNOWLEDGE MANAGEMENT
(An Institutional Publication and Data Inventory Repository)
"Not Available": Please do not remove the default option "Not Available" for the fields where metadata information is not available
"1001-01-01": Date not available or not applicable for filling metadata infromation
"1001-01-01": Date not available or not applicable for filling metadata infromation
Please use this identifier to cite or link to this item:
http://krishi.icar.gov.in/jspui/handle/123456789/58747
Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Dushyant Singh | en_US |
dc.contributor.author | DP Mondal | en_US |
dc.date.accessioned | 2021-08-19T05:28:30Z | - |
dc.date.available | 2021-08-19T05:28:30Z | - |
dc.date.issued | 2014-04-01 | - |
dc.identifier.citation | Not Available | en_US |
dc.identifier.issn | Not Available | - |
dc.identifier.uri | http://krishi.icar.gov.in/jspui/handle/123456789/58747 | - |
dc.description | Not Available | en_US |
dc.description.abstract | The study is conducted in order to determine the influence of quenching and tempering (QT) processes and intensity of shot peening on abrasive wear response of medium carbon SAE-6150 steel. Treated and un-treated specimens are shot peened from 0.17 A to 0.47 A intensities at an interval of 0.1 A. The abrasive wear of as-received (un-treated) and quenched-tempered steels subjected to varying peening intensities is obtained using dry sand abrasion test rig at 75, 200 and 375 N loads. Micro-structural, surface and sub-surface characterization are investigated by means of scanning electron microscope. The results exhibit that quenching and tempering processes reduced the wear rate considerably and improved the mechanical properties such as hardness, strength and percentage elongation significantly. Shot peening further reduced the wear rate of the steel if restricted to a certain peening intensity. | en_US |
dc.description.sponsorship | Not Available | en_US |
dc.language.iso | English | en_US |
dc.publisher | CSIR | en_US |
dc.relation.ispartofseries | Not Available; | - |
dc.subject | Heat-treatment, Shot peening, Abrasive wear | en_US |
dc.title | Effect of quenching - tempering process and shot peening intensity on wear behaviour of SAE-6150 steel | en_US |
dc.title.alternative | Not Available | en_US |
dc.type | Article | en_US |
dc.publication.projectcode | Not Available | en_US |
dc.publication.journalname | Indian Journal of Engineering and Materials Sciences | en_US |
dc.publication.volumeno | Vol. 22 | en_US |
dc.publication.pagenumber | 168-178 | en_US |
dc.publication.divisionUnit | Not Available | en_US |
dc.publication.sourceUrl | Not Available | en_US |
dc.publication.authorAffiliation | ICAR-CIAE | en_US |
dc.publication.authorAffiliation | CSIR-AMPRI | en_US |
dc.ICARdataUseLicence | http://krishi.icar.gov.in/PDF/ICAR_Data_Use_Licence.pdf | en_US |
dc.publication.naasrating | 6.52 | - |
Appears in Collections: | AEng-CIAE-Publication |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
Effect ofHeat-Treatment and Shot Peening on Low Stress.pdf | 580.42 kB | Adobe PDF | View/Open |
Items in KRISHI are protected by copyright, with all rights reserved, unless otherwise indicated.