Record Details

Reduced-switch three-phase active power filter with one cycle control

DSpace at IIT Bombay

View Archive Info
 
 
Field Value
 
Title Reduced-switch three-phase active power filter with one cycle control
 
Creator BALA, S
PATEL, N
FERNANDES, BG
 
Subject system
 
Description This paper presents a design for a three phase active power filter using a reduced switch (B4) topology and one-cycle control. The B4 topology offers the advantage of reduced cost and bridge losses at the expense of increased DC-side voltage and device stress. This design also provides the advantages associated with one-cycle control. This constant frequency switching technique requires neither load VAR calculation nor reference waveform generation and the control circuit is simple. Through analysis and simulations, the feasibility of the design and essential differences from a similar design reported in the literature are examined. A laboratory prototype has also been built and the experimental filter is able to compensate low power factor loads and suppress harmonic currents.
 
Publisher IEEE
 
Date 2011-10-25T09:08:43Z
2011-12-15T09:11:46Z
2011-10-25T09:08:43Z
2011-12-15T09:11:46Z
2004
 
Type Proceedings Paper
 
Identifier PESC 04: 2004 IEEE 35TH ANNUAL POWER ELECTRONICS SPECIALISTS CONFERENCE, VOLS 1-6, CONFERENCE PROCEEDINGS,2333-2339
0-7803-8399-0
0275-9306
http://dspace.library.iitb.ac.in/xmlui/handle/10054/15669
http://hdl.handle.net/100/2272
 
Source 35th Annual IEEE Power Electronics Specialists Conference (PESC 04),Aachen, GERMANY,JUN 20-25, 2004
 
Language English