Record Details

Granular flow in rotating cylinders with noncircular cross sections

DSpace at IIT Bombay

View Archive Info
 
 
Field Value
 
Title Granular flow in rotating cylinders with noncircular cross sections
 
Creator PRASAD, DVN
KHAKHAR, DV
 
Subject segregation
solids
motion
system
drums
 
Description An experimental and theoretical study is carried out of the flow of granular material in cylinders with different cross-sectional shapes rotated about their axes. The flow of particles in such geometries is confined to a shallow layer at the free surface. The length and thickness of the layer shrink and expand periodically with rotation of the cylinder, resulting in chaotic advection and improved mixing of passive tracers. Experimental results obtained by flow visualization are reported for quasi-two-dimensional mixers half filled with glass beads. A depth-averaged flow model to predict the time-varying layer thickness profile is presented, along with a perturbation solution in terms of a small parameter k, which is the ratio of the maximum layer thickness to the half length of the layer (L), at the cross-section orientation when the length is minimum. To the lowest order [O(k(0))], the model predicts that the layer profiles scaled with L(theta) at different mixer orientation angles (theta) are identical and the same as that for a circle. The measured layer thickness profiles averaged over different orientations of noncircular mixers match reasonably well with the theory, but the standard deviations are larger for the noncircular cylinders compared to the circle. The O(k) perturbation solution and the full theory both predict that the scaled layer thickness varies periodically; the deviations are proportional to the rate of change of the length with orientation. The perturbation solution gives results close to those from the numerical solution except at cylinder orientations when the length of the flowing layer changes sharply. The measured variation of the scaled midlayer thickness with orientation for all geometries is well predicted by the theory.
 
Publisher AMER PHYSICAL SOC
 
Date 2011-07-16T21:03:58Z
2011-12-26T12:49:57Z
2011-12-27T05:35:49Z
2011-07-16T21:03:58Z
2011-12-26T12:49:57Z
2011-12-27T05:35:49Z
2008
 
Type Article
 
Identifier PHYSICAL REVIEW E, 77(4), -
1539-3755
http://dx.doi.org/10.1103/PhysRevE.77.041301
http://dspace.library.iitb.ac.in/xmlui/handle/10054/4530
http://hdl.handle.net/10054/4530
 
Language en