Effect of water vapor in a y-cut lithium niobate waveguide
DSpace at IIT Bombay
View Archive InfoField | Value | |
Title |
Effect of water vapor in a y-cut lithium niobate waveguide
|
|
Creator |
AHMAD, M
CHELAPATHI, K PATRO, YGK |
|
Subject |
linbo3
diffusion |
|
Description |
In z-cut lithium niobate (LiNbO3) samples, surface damage has been observed after diffusion in a wet atmosphere, but recent reports show that with controlled dow of water vapor waveguides with good surface morphology and low loss can be obtained. Y-cut waveguides do not show any surface damage. Fabrication of y-cut waveguides diffused with controlled variation of water vapor in the ambient has not been reported to the best of our knowledge. We show that a minimum loss in y-cut waveguides is obtained at a particular water vapor content in the ambient, which is lower than the loss obtained for waveguides diffused in dry ambient. We have found a decrease in the waveguide loss to 0.3 dB/cm from 0.6 dB/cm for 1 mL of water vapor passed per hour as compared with a dry atmosphere. (C) 1996 Optical Society of America
|
|
Publisher |
OPTICAL SOC AMER
|
|
Date |
2011-08-19T10:31:16Z
2011-12-26T12:56:12Z 2011-12-27T05:44:30Z 2011-08-19T10:31:16Z 2011-12-26T12:56:12Z 2011-12-27T05:44:30Z 1996 |
|
Type |
Article
|
|
Identifier |
APPLIED OPTICS, 35(9), 1489-1491
0003-6935 http://dx.doi.org/10.1364/AO.35.001489 http://dspace.library.iitb.ac.in/xmlui/handle/10054/10320 http://hdl.handle.net/10054/10320 |
|
Language |
en
|
|