Record Details

Experimental and numerical investigation of capillary flow in SU8 and PDMS microchannels with integrated pillars

DSpace at IIT Bombay

View Archive Info
 
 
Field Value
 
Title Experimental and numerical investigation of capillary flow in SU8 and PDMS microchannels with integrated pillars
 
Creator SAHA, AA
MITRA, SK
TWEEDIE, M
ROY, S
MCLAUGHLIN, J
 
Subject microfluidic devices
underfill process
fluid interfaces
surface-tension
driven flow
chip
dynamics
fabrication
transient
channels
capillary flow
microchannel
numerical
three-dimensional
 
Description Microfluidic channels with integrated pillars are fabricated on SU8 and PDMS substrates to understand the capillary flow. Microscope in conjunction with highspeed camera is used to capture the meniscus front movement through these channels for ethanol and isopropyl alcohol, respectively. In parallel, numerical simulations are conducted, using volume of fluid method, to predict the capillary flow through the microchannels with different pillar diameter to height ratio, ranging from 2.19 to 8.75 and pillar diameter to pitch ratio, ranging from 1.44 to 2.6. The pillar size (diameter, pitch and height) and the physical properties of the fluid (surface tension and viscosity) are found to have significant influence on the capillary phenomena in the microchannel. The meniscus displacement is non-uniform due to the presence of pillars and the non-uniformity in meniscus displacement is observed to increase with decrease in pitch to diameter ratio. The surface area to volume ratio is observed to play major roles in the velocity of the capillary meniscus of the devices. The filling speed is observed to change more dramatically under different pillar heights upto 120 mu m and the change is slow with further increase in the pillar height. The details pertaining to the fluid distribution (meniscus front shapes) are obtained from the numerical results as well as from experiments. Numerical predictions for meniscus front shapes agree well with the experimental observations for both SU8 and PDMS microchannels. It is observed that the filling time obtained experimentally matches very well with the simulated filling time. The presence of pillars creates uniform meniscus front in the microchannel for both ethanol and isopropyl alcohol. Generalized plots in terms of dimensionless variables are also presented to predict the performance parameters for the design of these microfluidic devices. The flow is observed to have a very low Capillary number, which signifies the relative importance of surface tension to viscous effects in the present study.
 
Publisher SPRINGER HEIDELBERG
 
Date 2011-08-30T04:43:57Z
2011-12-26T12:58:46Z
2011-12-27T05:49:16Z
2011-08-30T04:43:57Z
2011-12-26T12:58:46Z
2011-12-27T05:49:16Z
2009
 
Type Article
 
Identifier MICROFLUIDICS AND NANOFLUIDICS, 7(4), 451-465
1613-4982
http://dx.doi.org/10.1007/s10404-008-0395-0
http://dspace.library.iitb.ac.in/xmlui/handle/10054/12196
http://hdl.handle.net/10054/12196
 
Language en