Record Details

In situ chemical vapour co-deposition of Al and Si to form diffusion coatings on TZM

DSpace at IIT Bombay

View Archive Info
 
 
Field Value
 
Title In situ chemical vapour co-deposition of Al and Si to form diffusion coatings on TZM
 
Creator MAJUMDAR, S
SHARMA, IG
RAVEENDRA, S
SAMAJDAR, I
BHARGAVA, P
 
Subject oxidation-resistant coatings
high-temperature oxidation
pack-cementation
mo-si
alloys
molybdenum
behavior
phase
interdiffusion
silicides
tzm
vapour deposition
lack cementation
oxidation
alumino-silicide
 
Description Multilayer alumino-silicide and silicide coatings were formed by in situ chemical vapour co-deposition of Al and Si on TZM (Mo-0.5Ti-0.1Zr-0.02C) alloy for improving its high-temperature oxidation resistance. MoSi2. and Mo (Si, Al)(2) layers were formed in the inner and the outer layers, respectively in the case of alumino-silicide coating. Whereas silicide coating consisted of Mo5Si3 and MoSi2 phases in the inner and the outer layers, respectively. 24-100-mu m thick coatings were formed by optimizing the pack Mixture of Al and or Si, NH4F and Al2O3 powders and conducting the experiments at 1000 degrees C for 8-36 h. MoSi2 layer showed a faster growth rate and presence of columnar grains. A small weight gain at the initial stages was observed during the oxidation tests of the coated samples under continuous or cyclic heating at 1300 degrees C in air. Neither cracks nor peeling of the coating layers were noticed after oxidation tests. (C) 2008
 
Publisher ELSEVIER SCIENCE SA
 
Date 2011-07-28T09:46:08Z
2011-12-26T12:58:55Z
2011-12-27T05:49:37Z
2011-07-28T09:46:08Z
2011-12-26T12:58:55Z
2011-12-27T05:49:37Z
2008
 
Type Article
 
Identifier MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 492(1-2), 211-217
0921-5093
http://dx.doi.org/10.1016/j.msea.2008.03.020
http://dspace.library.iitb.ac.in/xmlui/handle/10054/7367
http://hdl.handle.net/10054/7367
 
Language en