Effect of back pressure on impact and compression-after-impact characteristics of composites
DSpace at IIT Bombay
View Archive InfoField | Value | |
Title |
Effect of back pressure on impact and compression-after-impact characteristics of composites
|
|
Creator |
KULKARNI, MD
GOEL, R NAIK, NK |
|
Subject |
LOW-VELOCITY IMPACT
TRANSVERSE IMPACT FABRIC COMPOSITES DAMAGE TOLERANCE CROSS-PLY THICKNESS BEHAVIOR PANELS SHELL STRESS Composite Low velocity impact Back pressure Compression-after-Impact |
|
Description |
Low velocity impact and compression-after-impact characteristics of a typical plain weave E-glass/epoxy composite are studied experimentally Atmospheric pressure was maintained on the top surface and different pressures were applied on the rear side during impact experiments Pressure on the rear side of the Impacted plate is referred to as back pressure in further discussion Effect of back pressure on the impact behavior is studied It is observed that the variation in peak contact force and maximum central deflection are governed by two opposing phenomena The parameters influencing the opposing phenomena are induced curvature because of back pressure effective pre-stressing and effective thickness The incident impact energy was the same in all the experiments Post-impact compressive strength was also investigated (C) 2010 Elsevier Ltd All rights reserved
|
|
Publisher |
ELSEVIER SCI LTD
|
|
Date |
2012-06-26T06:32:20Z
2012-06-26T06:32:20Z 2011 |
|
Type |
Article
|
|
Identifier |
COMPOSITE STRUCTURES,93(2)944-951
0263-8223 http://dx.doi.org/10.1016/j.compstruct.2010.06.027 http://dspace.library.iitb.ac.in/jspui/handle/100/14045 |
|
Language |
English
|
|