Record Details

Laboratory evaluation of stiffness, low-temperature cracking, rutting, moisture damage, and fatigue performance of WMA mixes

DSpace at IIT Bombay

View Archive Info
 
 
Field Value
 
Title Laboratory evaluation of stiffness, low-temperature cracking, rutting, moisture damage, and fatigue performance of WMA mixes
 
Creator GHABCHI, R
SINGH, D
ZAMAN, M
 
Subject ASPHALT BINDERS
fatigue life
warm mix asphalt
creep
rut
dynamic modulus
moisture damage
 
Description Despite the environmental and compaction benefits of warm mix asphalt (WMA), several researchers have expressed concerns over laboratory and field performances of WMA mixes. In this study, a wide range of laboratory tests, namely, dynamic modulus, creep compliance, fatigue, moisture damage, and rutting, was conducted to evaluate the performance of different types of WMA mixes. For this purpose, three WMA mixes, consisting of one mix produced using a zeolite-based WMA additive (containing water), one surface course mix, and one base course mix, the latter two produced with a chemical-based WMA additive with surfactant technology, were collected from different field projects in Texas. In addition, three hot mix asphalt (HMA) mixes with aggregate gradations similar to those of the collected WMA mixes were produced in the laboratory to compare the performance of WMA and HMA mixes. Overall, the WMA mixes yielded lower stiffness, reduced potential of low-temperature cracking, lower fatigue resistance, and a higher rutting potential compared with their HMA counterparts. However, a mixed trend of moisture-induced damage potential was observed for WMA and HMA mixes, when evaluated using retained tensile strength ratio (TSR) and stripping inflection point (SIP) obtained from the Hamburg wheel tracking (HWT) test. In other words, no correlation was found between TSR and SIP values, indicating that passing a TSR test does not guarantee better performance of a mix when tested using an HWT. The results from this study reveal that performance of a WMA mix widely depends on the technology and the type of other additives (e.g. anti-stripping agent) used. The findings of this study are expected to be useful to pavement professionals to better understand the performance of WMA mixes and to develop a database of input parameters for the Mechanistic-Empirical Pavement Design Guide.
 
Publisher TAYLOR & FRANCIS LTD
 
Date 2016-01-15T08:09:10Z
2016-01-15T08:09:10Z
2015
 
Type Article
 
Identifier Road Materials and Pavement Design, 16(2)334-357
1468-0629
2164-7402
http://dx.doi.org/10.1080/14680629.2014.1000943
http://dspace.library.iitb.ac.in/jspui/handle/100/18129
 
Language en