Record Details

Development and Application of Kinetic Meshless Methods for Euler Equations

Electronic Theses of Indian Institute of Science

View Archive Info
 
 
Field Value
 
Title Development and Application of Kinetic Meshless Methods for Euler Equations
 
Creator C, Praveen
 
Subject Aerospace Engineering (aero)
Meshless Method
Kinetic scheme
Least squares
Euler equations
FAME
 
Description Meshless methods are a relatively new class of schemes for the numerical solution of partial differential equations. Their special characteristic is that they do not require a mesh but only need a distribution of points in the computational domain. The approximation at any point of spatial derivatives appearing in the partial differential equations is performed using a local cloud of points called the "connectivity" (or stencil). A point distribution can be more easily generated than a grid since we have less constraints to satisfy.

The present work uses two meshless methods; an existing scheme called Least Squares Kinetic Upwind Method (LSKUM) and a new scheme called Kinetic Meshless Method (KMM). LSKUM is a "kinetic" scheme which uses a "least squares" approximation} for discretizing the derivatives occurring in the partial differential equations. The first part of the thesis is concerned with some theoretical properties and application of LSKUM to 3-D point distributions. Using previously established results we show that first order LSKUM in 1-D is positivity preserving under a CFL-like condition. The 3-D LSKUM is applied to point distributions obtained from FAME mesh. FAME, which stands for Feature Associated Mesh Embedding, is a composite overlapping grid system developed at QinetiQ (formerly DERA), UK, for store separation problems.

The FAME mesh has a cell-based data structure and this is first converted to a node-based data structure which leads to a point distribution. For each point in this distribution we find a set of nearby nodes which forms the connectivity. The connectivity at each point (which is also the "full stencil" for that point) is split along each of the three coordinate directions so that we need six split (or half or one-sided) stencils at each point. The split stencils are used in LSKUM to calculate the split-flux derivatives arising in kinetic schemes which gives the upwind character to LSKUM. The "quality" of each of these stencils affects the accuracy and stability of the numerical scheme. In this work we focus on developing some numerical criteria to quantify the quality of a stencil for meshless methods like LSKUM.

The first test is based on singular value decomposition of the over-determined problem and the singular values are used to measure the ill-conditioning (generally caused by a flat stencil). If any of the split stencils are found to be ill-conditioned then we use the full stencil for calculating the corresponding split flux derivative. A second test that is used is based on an accuracy measurement. The idea of this test is that a "good" stencil must give accurate estimates of derivatives and vice versa. If the error in the computed derivatives is above some specified tolerance the stencil is classified as unacceptable. In this case we either enhance the stencil (to remove disc-type degenerate structure) or switch to full stencil. It is found that the full stencil almost always behaves well in terms of both the tests. The use of these two tests and the associated modifications of defective stencils in an automatic manner allows the solver to converge without any blow up. The results obtained for a 3-D configuration compare favorably with wind tunnel measurements and the framework developed here provides a rational basis for approaching the connectivity selection problem.

The second part of the thesis deals with a new scheme called Kinetic Meshless Method (KMM) which was developed as a consequence of the experience obtained with LSKUM and FAME mesh. As mentioned before the full stencil is generally better behaved than the split stencils. Hence the new scheme is constructed so that it does not require split stencils but operates on a full stencil (which is like a centered stencil). In order to obtain an upwind bias we introduce mid-point states (between a point and its neighbour) and the least squares fitting is performed using these mid-point states. The mid-point states are defined in an upwind-biased manner at the kinetic/Boltzmann level and moment-method strategy leads to an upwind scheme at the Euler level. On a standard 4-point Cartesian stencil this scheme reduces to finite volume method with KFVS fluxes. We can also show the rotational invariance of the scheme which is an important property of the governing equations themselves.

The KMM is extended to higher order accuracy using a reconstruction procedure similar to finite volume schemes even though we do not have (or need) any cells in the present case. Numerical studies on a model 2-D problem show second order accuracy. Some theoretical and practical advantages of using a kinetic formulation for deriving the scheme are recognized. Several 2-D inviscid flows are solved which also demonstrate many important characteristics. The subsonic test cases show that the scheme produces less numerical entropy compared to LSKUM, and is also better in preserving the symmetry of the flow. The test cases involving discontinuous flows show that the new scheme is capable of resolving shocks very sharply especially with adaptation. The robustness of the scheme is also very good as shown in the supersonic test cases.
 
Publisher Indian Institute of Science
 
Contributor Deshpande, S M
 
Date 2005-10-17T09:51:52Z
2005-10-17T09:51:52Z
2005-10-17T09:51:52Z
2004-07
 
Type Electronic Thesis and Dissertation
 
Format 14459170 bytes
application/pdf
 
Identifier http://hdl.handle.net/2005/154
115199529
 
Language en
 
Rights I grant Indian Institute of Science the right to archive and to make available my thesis or dissertation in whole or in part in all forms of media, now hereafter known. I retain all proprietary rights, such as patent rights. I also retain the right to use in future works (such as articles or books) all or part of this thesis or dissertation.