Record Details

Bidirectional Invertor With High Frequency Ac Link

Electronic Theses of Indian Institute of Science

View Archive Info
 
 
Field Value
 
Title Bidirectional Invertor With High Frequency Ac Link
 
Creator Karuppuswamy, C
 
Subject Electric Inverters
Electric Converter
High Frequency Ac Link
Power Converters
Digital Controllers
Cycloconverter
H Bridge Inverter
HF-Transformer
Electrical Engineering
 
Description It is customary to obtain ac power from batteries through a power converter, where mains ac power is not readily available. Such a power converter is also needed in several mobile/ airborne/ space applications.
Till recently this application is served by a H bridge inverter followed by a low frequency transformer and a passive low pass filter. The H bridge inverter employs high frequency pulse width modulation. The transformer is made of standard silicon steel. The filter is made of L and C elements. In such a converter the magnetics account for about 30% of cost and 50% of weight. Moreover the dc input current in such converters is discontinuous, leading to poor efficiency. There is need for an input filter as well.
This thesis presents the development of an inverter with high frequency (hf) link. The power converter employs a boost front end resulting in continuous input current. The H bridge inverter employs phase modulation technique with soft switching features. The boost converter and the H bridge share power devices. The isolation transformer handles high frequency ac power and is compact. It is shown that the transformer size can be reduced by more than one order of magnitude. There is a rear end cycloconverter to reconvert the high frequency ac power into 50 Hz output power. Innovative pulse sequencing in the cycloconverter ensures loss-less switching. The pulse width modulation shifts the dominant harmonic frequency to double the switching frequency. The output LC filter is light. The converter can handle bidirectional power. The controller is digital. The overall concept was demonstrated through the 500 W prototype design. The proposed topology offers small size, low losses and continous input current. The controller is digital and offers totally software based compensation and settings.
It is expected that on account of the small size and cost, this topology is likely to become more popular in the near future. The applications of such power converters will bring down the size and cost of UPS, solar inverters, wind mill inverters etc.
 
Contributor Ramanarayanan, V
 
Date 2010-09-22T07:03:19Z
2010-09-22T07:03:19Z
2010-09-22
2009-03
 
Type Thesis
 
Identifier http://hdl.handle.net/2005/877
 
Language en_US
 
Relation G23066