Record Details

Analysis of electro discharge machined surfaces of EN-31 tool steel

NOPR - NISCAIR Online Periodicals Repository

View Archive Info
 
 
Field Value
 
Title Analysis of electro discharge machined surfaces of EN-31 tool steel
 
Creator Payal, H S
Choudhary, Rajesh
Singh, Sarabjeet
 
Subject Electric discharge machining (EDM)
Metal removal rate (MRR)
Surface roughness (SR)
 
Description 1072-1077
In this study, experiments were performed to determine parameters effecting surface roughness (SR) along with structural
analysis of surfaces with respect to material removal parameters. Experimental work was conducted on EN-31 tool steel with
copper, brass and graphite as tool electrodes with kerosene oil as dielectric fluid. The data compiled during experimentation
has been used to yield responses in respect of material removal rate (MRR) and SR. Detailed analysis of structural features of
machined surface was done by using Scanning Electron Microscope (SEM) and optical microscope to understand the mode of
heat affected zone (HAZ), which alternatively affects structure of machined workpiece and hence tool life. While investigating
electric discharge machining (EDM) surface by micrographs, it was observed that molten mass has been removed from surface
as ligaments and sheets. In some cases, it is removed as chunks, which being in molten state stuck to surface. All three
specimens machined by different electrodes showed different pattern of HAZs.
 
Date 2008-12-05T06:06:28Z
2008-12-05T06:06:28Z
2008-12
 
Type Article
 
Identifier 0022-4456
http://hdl.handle.net/123456789/2537
 
Language en_US
 
Publisher CSIR
 
Source JSIR Vol.67(12) [December 2008]