Record Details

Production of hydrogen-rich gas via reforming of iso-octane over Ni–Mn and Rh–Ce bimetallic catalysts using spray pulsed reactor

IR@CSIR-NEERI

View Archive Info
 
 
Field Value
 
Title Production of hydrogen-rich gas via reforming of iso-octane over Ni–Mn and Rh–Ce bimetallic catalysts using spray pulsed reactor
 
Creator Biniwale , Rajesh B.
Ichikawa, Masaru
 
Subject Materials Science
 
Description The conversion of hydrocarbon fuels such as gasoline and diesel is a potential source for hydrogen production towards various fuel cell systems. A novel spray pulsed mode reactor to create alternate wet and dry conditions on the catalyst surface has been used in this study to enhance the rates of hydrogen production compared with the solid-gas phase reaction due to the improvement of the catalyst reactant contact. The production of hydrogen-rich gas by reforming of iso-octane (2,2,4-trimethylepentane) in the presence of steam and air has been studied at 600 and 700 LC over Ni–Mn and Rh–Ce bimetallic catalysts supported on alumina mesh. The feed rate of iso-octane was varied from 0.553 to 5.53 m mol min)1 by controlling pulse injection in terms of the width and frequency of injection of iso-octane. Based on the product analysis optimized condition for higher hydrogen production and high H2/CO ratio has been deduced.

KEY WORDS: iso-octane reforming; hydrogen production; bimetallic catalysts; pulse spray injection.
 
Publisher Springer
 
Date 2005-03
 
Type Article
PeerReviewed
 
Format application/pdf
 
Identifier http://neeri.csircentral.net/513/1/Catalysis_letter_100_2005.pdf
Biniwale , Rajesh B. and Ichikawa, Masaru (2005) Production of hydrogen-rich gas via reforming of iso-octane over Ni–Mn and Rh–Ce bimetallic catalysts using spray pulsed reactor. Catalysis Letters, 100 (1-2). pp. 17-25. ISSN 1011-372X
 
Relation http://link.springer.com/article/10.1007/s10562-004-3080-2
http://neeri.csircentral.net/513/