Record Details


Field	Value

Title	Utilization of dissolved iron as catalyst during Fenton-like oxidation of pretreated pulping effluent

Names	LAL, K GARG, A
Date Issued	2017 (iso8601)
Abstract	Effluent arising from kraft or soda pulping section of a pulp and paper mill is difficult to treat due to the presence of recalcitrant organics such as lignin. In this study, FeCl3 pretreated pulping effluent was subjected to Fenton-like oxidation. Residual dissolved iron from pretreatment step and H2O2 were utilized as catalyst and oxidant, respectively while the initial wastewater pH was 4.0 (unadjusted). The maximum lignin and total organic carbon (TOC) removals of 85% and 48% could be achieved within 2 h of reaction. The oxidation reaction was mediated by hydroxyl radicals (HO center dot) which were detected by electron spin resonance (ESR) spectroscopy. Moreover, the addition of tertiary butyl alcohol and chloroform (both radical scavengers) as well hydroxyl amine (a ferrous ion recycler) affected TOC removal significantly. The TOC degradation data could adequately be fit in a lumped kinetic model (LKM) and the activation energy was calculated as 50.85 kJ/mol. The nature of chemical compounds in treated wastewater was also predicted using Fourier transforms infrared (FTIR) spectroscopy. (C) 2017 Institution of Chemical Engineers. Published by Elsevier B.V. All rights reserved.
Genre	Article
Topic	WASTE-WATER TREATMENT
Identifier	PROCESS SAFETY AND ENVIRONMENTAL PROTECTION,111,766-774

ICAR Research Data Repository for Knowledge Management