Record Details

Alternative Mechanisms for Size Control in Synthesis of Nanoparticles - Population Balance Modelling and Experimental Studies

Electronic Theses of Indian Institute of Science

View Archive Info
 
 
Field Value
 
Title Alternative Mechanisms for Size Control in Synthesis of Nanoparticles - Population Balance Modelling and Experimental Studies
 
Creator Perala, Siva Rama Krishna
 
Subject Nanoparticles - Synthesis
Metal Nanoparticles
Iridium Nanoparticles
Calcium Carbonate Nanoparticles
Gold Nanoparticles
Brust-Schiffrin Method (BSM)
Finke-Watzky Model
Phase Transfer Catalysis
Brust–Schiffrin Synthesis
CaCO3 Nanoparticles
Particle/Droplet Size Analysis (PDIA)
Nanotechnology
 
Description The extensive growth of nanotechnology has necessitated the development of economical and robust methods for large scale production of nanomaterials. It requires detailed quantitative understanding of lab-scale processes to enable effective scale-up and development of new contacting strategies for their controlled synthesis. In this
thesis, attempts are made in both the directions using experimental and modelling approaches for synthesis of
different nanoparticles.
The two-phase Brust--Schiffrin protocol for the synthesis of gold nanoparticles was investigated first. The
mechanism of transfer of reactants from aqueous to organic phase using phase transfer catalyst (PTC) was investigated using the measurement of interfacial tension, viscosity, SLS, SAXS, 1H NMR, DOSY-NMR, and
Karl-Fischer titration. The study shows that the reactants are transferred to organic phase through the formation of hydrated complexes between reactants and PTC rather than through the solubilization of reactants in water core of inverse micelles of PTC, proposed recently in the literature. The particle synthesis reactions thus occur in
the bulk organic phase. The extensive body of seemingly disparate experimental findings on Brust--Schiffrin protocol were put together next. The emerging picture ruled out both thermodynamic considerations and
kinetics based arguments as exemplified by the classical LaMer's mechanism with sequential nucleation growth capping for size control in Brust--Schiffrin protocol. A new model for particle synthesis was developed.
The model brought out continued nucleation--growth--capping based size control, an hitherto unknown mechanistic route for the synthesis of monodisperse particles, as the main mechanism. The model not only
captured the reported features of the synthesis but also helped to improve the uniformity of the synthesized
particles, validated experimentally.
The two-step mechanism of Finke--Watzky---first order nucleation from precursor and autocatalytic growth of particles---proposed as an alternative to LaMer model to explain an induction period followed by a sigmoidal
decrease in precursor concentration for the synthesis of iridium nanoparticles was investigated next. The mechanism is tested using an equivalent population balance model for its ability to explain the experimentally
observed near constant breadth of the evolving size distribution as well. The predictions show that while it
captures precursor conversion well, it fails to explain particle synthesis on account of its inability to suppress nucleation. A minimal four-step mechanism with additional steps for nucleation from reduced iridium atoms and their scavenging using particle surface is proposed. The new mechanism when combined with the first or second order nucleation, or classical nucleation with no scavenging of reduced atoms also fails to suppress nucleation.
A burst like onset of nuclei formation with homogeneous nucleation and the scavenging of reduced atoms by particles are simultaneously required to explain all the reported features of the synthesis of iridium nanoparticles.
A new reactor is proposed for continuous production of CaCO3 nanoparticles in gas-liquid reaction route. The key feature of the new reactor is the control of flow pattern to ensure efficient mixing of reactants. A liquidliquid reaction route for production of CaCO3 nanoparticles is also optimized to produce nanoparticles at high loading. Optimum supersaturation combined with efficient breakup of initial gel-like
structure by mechanical agitation and charge control played a crucial role in producing nano sized CaCO3 particles.
 
Contributor Kumar, Sanjeev
 
Date 2018-04-06T08:25:19Z
2018-04-06T08:25:19Z
2018-04-06
2013
 
Type Thesis
 
Identifier http://etd.iisc.ernet.in/2005/3361
http://etd.iisc.ernet.in/abstracts/4229/G25762-Abs.pdf
 
Language en_US
 
Relation G25762