Record Details

Supporting Real-Time, Automated Evaluation of Difficulty in Manual Assembly

Electronic Theses of Indian Institute of Science

View Archive Info
 
 
Field Value
 
Title Supporting Real-Time, Automated Evaluation of Difficulty in Manual Assembly
 
Creator Santhi, B
 
Subject Assemblability Evaluation
Body Tracking Systems
Automatic Assemblability
Electromagnetic Trackers
Automatic Body Tracking
Body Postures - Tracking
Body Tracking Method
Assemblability
Product Design and Manufacturing
 
Description Product designers address the costs of assembly during the design process. Design process can be more efficient if assembly issues could be addressed early in its design process. Doing this requires the ability to assess assemblability among others. Assemblability refers to the ease of assembling the final product from its parts. Assemblability evaluation is applied by product designers for quantitatively estimating the degree of difficulty of the assembly. This helps in identifying areas of improvement, so as to reduce process time and production costs. This work focuses on assessing assemblability in a manual assembly and its importance in the earlier phases of design.
Literature contains various methods for assessing assemblability (e.g. Boothroyd-Dewhurst method, the DFA house, Sturges DFA calculator and Sony DFA method). These methods are typically rule-based and their use requires insight and knowledge on the part of the designer. Further, the designer has to interpret and apply them differently in each specific and unique case. Literature also contains methods for ergonomic assessment of manual work and its link with assemblability. Both observation based ergonomic assessment such as RULA, REBA, VIDAR, LUBA and OWAS and instrumentation based ergonomic assessment using electro-goniometer and accelerometer are the techniques reviewed in this thesis for their suitability in assembly assessment. The most recent trend in the area is automation of the evaluation process. This thesis proposes an approach to automated assessment of assemblability using electromagnetic trackers.
In spite of advances in industrial automation, manual assembly tasks continue to be an important feature of many industrial operations. The method proposed in the thesis is for the assessment of assemblability of manual assembly that combines both time and postural analysis. The tool used for the static analysis is called Rapid Upper Limb Assessment (RULA); for dynamic analysis a new method of time analysis is proposed that is based on the ratio of time spent in fine and gross motions carried out in an assembly process. The difficulty of assembly of a series of manual assembly tasks are carried out in a laboratory setting. Then by correlating this assessment with the feedback on the difficulty of these assembly task obtained from the subjects who carried out these tasks.
The remaining work carried out as a part of this thesis is focussed on automating the process of carrying out the above assessment in an automated manner. Suitability of electromagnetic trackers as a means for automated capture of data necessary for executing the proposed assessment method is studied. Electromagnetic trackers have been used to capture postural data for various limbs of the assembly operators. Data from the limbs are then analysed to identify, to which limb movement signifies which sources of difficulty (i.e. reach, visibility, etc.) in assembly; for example reach difficulty is indicated by torso movement. Finally, the thesis proposes as a part of the future work in possible improvement of the assessment method. Also, its application using a virtual reality (VR) platform assesses in ascertaining ease or difficulties in assembly and many.
 
Contributor Chakrabarti, Amaresh
Gurumoorthy, B
 
Date 2018-08-29T06:45:44Z
2018-08-29T06:45:44Z
2018-08-29
2017
 
Type Thesis
 
Identifier http://etd.iisc.ernet.in/2005/3992
http://etd.iisc.ernet.in/abstracts/4880/G28549-Abs.pdf
 
Language en_US
 
Relation G28549