ICAR Research Data Repository for Knowledge Management
Studies on Amorphous Silicon Thin Films Doped with Aluminium
Electronic Theses of Indian Institute of Science
View Archive Info| Field | Value | |
| Title |
Studies on Amorphous Silicon Thin Films Doped with Aluminium
|
|
| Creator |
Ho, Kang Jin
|
|
| Subject |
Electronics Engineering
Silicon Thin Films Amorphous Semiconductors - Doping A1 doped Sputtered Silicon films Solids - Electrical Conduction Thermionic Emission Diffusion Process Schottky Barrier Diodes Polycrystalline Semiconductors - Conductivity Amorphous Semiconductors - Electrical Conduction |
|
| Description |
Amorphous Silicon(a-Si) films have attracted the attention of several investigators as it is an economical material for devices. One of the problems that is addressed is the doping of these films after they are prepared. In this thesis, we investigated the effects of doping amorphous Silicon films(prepared by r.f. sputtering) with Aluminium(Al) by thermal diffusion. Amorphous Silicon films have been prepared on glass substrates at optimal process parameters. Then, the a-Si films are coated with Al by vacuum evaporation and subjected to heating in N2 atmosphere in the temperature range 300°C to 600°C for different durations. After etching Al layer, it has been found that some of the films which are heated around 550°C contain filament like polycrystalline regions surrounding islands of a-Si. This structure has been confirmed through Scanning Electron Mi-croscope(SEM) photographs and electrical conductivity measurements. SEM photographs indicate that, bright regions of amorphous material are surrounded by dark regions of relatively higher conducting boundaries. The electrical conductivity study shows that there is sharp increase in conductivity of Al doped films, which is attributed to the conducting polycrystalUne filament. A simple model has been proposed to explain the variation of conductivity of these transformed films, with process parameters and with temperature. Schottky barrier diodes have been fabricated using these transformed materials and their characteristics explained. |
|
| Publisher |
Indian Institute of Science
|
|
| Contributor |
Satyam, M
|
|
| Date |
2005-10-25T05:23:31Z
2005-10-25T05:23:31Z 2005-10-25T05:23:31Z 1995-01 |
|
| Type |
Electronic Thesis and Dissertation
|
|
| Format |
1791859 bytes
application/pdf |
|
| Identifier |
http://etd.iisc.ernet.in/handle/2005/157
null |
|
| Language |
en
|
|
| Rights |
I grant Indian Institute of Science the right to archive and to make available my thesis or dissertation in whole or in part in all forms of media, now hereafter known. I retain all proprietary rights, such as patent rights. I also retain the right to use in future works (such as articles or books) all or part of this thesis or dissertation.
|
|