Record Details

Analytical Models For Stress-Strain Response Of Fiber-Reinforced Soil And Municipal Solid Waste

Electronic Theses of Indian Institute of Science

View Archive Info
 
 
Field Value
 
Title Analytical Models For Stress-Strain Response Of Fiber-Reinforced Soil And Municipal Solid Waste
 
Creator Chouksey, Sandeep Kumar
 
Subject Solid Waste
Sewage
Fiber Reinforced Soil
Municipal Solid Waste
Soil Mechanics
Fiber Reinforced Soils - Constitutive Model
Municipal Solid Waste - Constitutive Model
Geotechnical Engineering
 
Description The present thesis proposes model for the analyses of stress-strain response of fiber reinforced soil and municipal solid waste (MSW). The concept of reinforcing soils by introducing tension resisting elements such as fibers is becoming widely accepted. Fiber inclusions are found to improve the post-peak behavior of the soil. Evaluation of the stress-strain response of the fiber-reinforced soil indicates that mobilization of the fiber tension generally requires a strain level higher than that corresponding to the peak strength of unreinforced soil. Further, geotechnical engineering properties of MSW such as compressibility, shear strength and stiffness are of prime importance in design and maintenance of landfills. It is also referred in literature that MSW tends to behave as fiber-reinforced soil due to the presence of various types of wastes in its matrix. However, it is not well understood how the stress-strain and strength characteristics vary with time as the biodegradation of waste continues in the landfill.
Based on the experimental observations, in this thesis, an attempt is made for developing generalized constitutive models based on the critical state soil mechanics frame work for fiber reinforced soils and municipal solid waste. The proposed models consider the fiber effect in fiber reinforced soil and, time dependent mechanical and biodegradation effects in case of municipal solid waste, respectively. The proposed models are able to capture the stress-strain and pore water pressure response in both the cases.
For better understanding, the present thesis is divided into following seven chapters.
Chapter 1 is an introductory chapter, in which the need for use of the constitutive models is presented. Further, the organization of thesis is also presented.
Chapter 2 presents a brief description of the available studies in the literature on fiber-reinforced soils and municipal solid waste. Various studies on fiber-reinforced soil included experimental results (both laboratory and field) and modeling methods. Experiments on fiber-reinforced soils were mainly carried out with triaxial compression tests, unconfined compression tests, direct shear tests, one dimensional consolidation tests, etc. Force equilibrium model, limit equilibrium model, statistical theory, regression based models are some of the models available in the literature for quantifying the strength of the fiber-reinforced soil. Further, various studies with regard to the engineering properties of municipal solid waste and their characteristic properties available in the literature are presented. They include different models proposed by various researchers for the prediction of stress-strain response, time dependent behavior and load settlement analysis of the municipal solid waste. Finally, based on the literature review, the scope and objectives of the thesis are presented at the end.
Chapter 3 describes various types of soils, properties of soils and fibers used in the present study. A detailed description of the sample preparation and methods adopted in the experimental program are presented in this chapter.
Chapter 4 presents the experimental results of triaxial compression tests and one dimensional consolidation test carried out on fiber-reinforced soils. Based on the experimental observations, a constitutive model for fiber-reinforced soil in the frame work of modified cam clay model is proposed. Further, the detailed derivation of proposed model and the discussion on evaluation of the input model parameters from triaxial and consolidation tests are presented. The predictions from the proposed models are validated with the experimental data. From the comparison of the results from the proposed model and experiments, it is evident that the proposed model is able to capture stress-strain behavior of fiber-reinforced soils.
Chapter 5 presents the experimental studies on the behavior of municipal solid waste based on the triaxial compression and consolidation tests. Based on the experimental observations, a constitutive model for municipal solid waste in the frame work of modified cam clay model is proposed which considers the mechanisms such as mechanical creep and biodegradation. It also provides detailed description of the selection of the input parameters required for the proposed model. The experimental results in the form of stress-strain and pore water pressure response are compared with the prediction from the proposed model. In addition, the applicability of the proposed model is illustrated using detailed parametric studies of parameters of the model for various ranges.
Chapter 6 presents a brief study of load settlement response on municipal solid waste using a case example. The constitutive model for municipal solid waste proposed in chapter 5 is used to study the time-settlement response of municipal solid waste and to compare the results with available published models considering different mechanisms. The major conclusions from the study are presented at the end.
Chapter 7 presents a brief summary and conclusions from the various studies reported in the present thesis.
vi
 
Contributor Babu, G L Sivakumar
 
Date 2011-04-01T11:32:52Z
2011-04-01T11:32:52Z
2011-04-01
2009-07
 
Type Thesis
 
Identifier http://etd.iisc.ernet.in/handle/2005/1111
 
Language en_US
 
Relation G23422