Record Details

Nanotribology Of Emulsified Lubricants

Electronic Theses of Indian Institute of Science

View Archive Info
 
 
Field Value
 
Title Nanotribology Of Emulsified Lubricants
 
Creator Kumar, Deepak
 
Subject Nanotribology
Lubricants
Friction
Lubrication
Emulsion
Sodium Oleate
Steel Substrate
Thin Water Film
Metalworking Fluids (MWFs)
Oil Film
Machine Engineering
 
Description In case of metalworking operations, the purpose of lubrication is served by a complex mixture of two or more phases, these mixtures are known as metalworking fluids (MWFs). For many decades oil-in-water emulsions have been used as metalworking fluids. The particular advantage of using oil-in-water emulsion in metalworking operations is that it combines the cooling property of water and the lubrication property of the oil. To explain the lubrication mechanism for oil-in-water emulsions as metalworking fluids a variety of models and theories has been proposed. To understand the lubrication mechanism, the role of each ingredient in the tribological process needs to be studied. In the present study a model for lubrication which determines force and proximity regimes of droplets based on the droplet size distribution is proposed. Dynamic light scattering (DLS) is used to characterize the emulsions. The small droplets are found to be the ones which enhance lubricity. DLVO (Derjaguin-Landau-Verwey-Overbeek) theory is used to validate the results. The concentration and type of surfactant is found to be the performance controlling parameter. A further analysis of the three interfacial energetics; oil/water, oil/substrate, water/substrate, is studied in the presence and absence of surfactants with the help of a Goniometer, Fourier transform infrared spectroscopy (FTIR), atomic force microscopy (AFM). Such energetics reflects the rate at which the excess surfactant molecules accumulate at the water/oil interface and desorb into the phases. The tribological response is recorded using AFM and the nanotribometer (NTR). Frictional response of the chemisorbed self-assembled monolayer of surfactant (sodium oleate) on the steel substrate reflects that a tribofilm helps in lubricating the contact under boundary lubrication by creating a low shear strength material. Water being the continuous phase in oil/water emulsion a thin water layer adjacent to steel substrate is always present. This thin layer on the solid substrate acts as a barrier to the lubricating oil droplets to reach the metal surface. The focus of the present work is also to investigate conditions which permit the disjoining of the water film to allow the oil to lubricate the metal substrate. AFM is used to study the interaction force between an oil droplet and the steel substrate through water. An oil encapsulated SiO2 colloidal probe used to simulate the oil droplet. The charge regulatory status of the substrates and interfaces are found to be critical in mapping the force characteristics when DLVO interaction is considered. The condition for activation of non-DLVO (hydration, hydrophobic, capillary) forces are also identified and found to be dependent on the physical states of surfaces. Disjoining of the thin film can be controlled by selecting surfactants based on interfacial energetics and attractive force characteristic can be achieved to facilitate lubrication.
 
Contributor Biswas, S K
 
Date 2011-07-01T05:08:30Z
2011-07-01T05:08:30Z
2011-07-01
2010-06
 
Type Thesis
 
Identifier http://etd.iisc.ernet.in/handle/2005/1257
http://etd.ncsi.iisc.ernet.in/abstracts/1637/G23835-Abs.pdf
 
Language en_US
 
Relation G23835