ICAR Research Data Repository for Knowledge Management
CCS - MV Bluefin 2017 V01 fCO2
CSIRO RDS Repository
View Archive Info| Field | Value | |
| Title |
CCS - MV Bluefin 2017 V01 fCO2
|
|
| Creator |
Bronte Tilbrook
|
|
| Subject |
Physical Oceanography
Chemical Oceanography |
|
| Description |
A General Oceanics model 8050 fCO2 analyser was installed in the carbon team’s container and measured seawater from the ship’s auxiliary seawater pump for the duration of the voyage. Component sensors: Sensor | Make Model | Calibration Non-dispersive infra-red CO2 analyser | Licor | LI-7000 | Continuous (see below) Equilibrator temperature sensor | Hart-Fluke | 1521 | Jan 2017 Survey settings: The instrument was configured in continuous flow mode with a measurement interval of 30 seconds. Seawater fCO2 measurements are interrupted for about 22 minutes every 4 hours for analysis of calibration gases and atmospheric air. Calibration Information: The system ran a set of 4 calibration gases every 4 hours. Calibration gas concentrations are 0.00 ppm, 261.41 ppm, 377.78 ppm and 450.79 ppm. Calibrations are applied in post-processing. |
|
| Publisher |
CSIRO
|
|
| Contributor |
John Akl
Craig Neill Erik Van Ooijen |
|
| Date |
2018-06-20
|
|
| Type |
—
|
|
| Format |
—
|
|
| Identifier |
csiro:33400
|
|
| Language |
—
|
|
| Coverage |
—
|
|
| Rights |
—
|
|