Record Details

An experimental and simulation validation of residual stress measurement for manufacturing of friction stir processing tool

NOPR - NISCAIR Online Periodicals Repository

View Archive Info
 
 
Field Value
 
Title An experimental and simulation validation of residual stress measurement for manufacturing of friction stir processing tool
 
Creator Butola, Ravi
Murtaza, Qasim
Singari, Ranganath Muttana
 
Subject ABAQUS/CAE
Residual stresses
Turning
Tool steel
Friction stir processing
 
Description 826-836
Residual stresses have been considered to be an important parameter when friction stir processing (FSP) tool is to be manufactured. FSP has often been used for surface modification and fabrication of surface composites. Involuntary residual stress in a designed tool may cause it to fail before due time. Because of this, the knowledge about the stresses on the tool probe after its machining has been considered to be desirable. The present research has focused on the analysis of the residual stresses on the tip and periphery of the FSP tool probe which has been manufactured using H13 tool steel material during the turning processes on a CNC lathe machine. The experiments have been performed on two different types of tool probes, namely circular, tapered circular probes. ABAQUS/CAE simulation has been performed for circular and tapered circular probe, as the provision of a sustainable, simple and reasonable model to analyze the machining processes (using ABAQUS/CAE software) has been the primary objective of this research. The results have been found to be within a close range of the experimental observations. The same model can thus be applied to other geometries.
 
Date 2020-11-24T09:20:24Z
2020-11-24T09:20:24Z
2020-08
 
Type Article
 
Identifier 0975-1017 (Online); 0971-4588 (Print)
http://nopr.niscair.res.in/handle/123456789/55687
 
Language en_US
 
Rights CC Attribution-Noncommercial-No Derivative Works 2.5 India
 
Publisher NISCAIR-CSIR, India
 
Source IJEMS Vol.27(4) [August 2020]