Removal of trivalent and pentavalent arsenic from water using chemically modified chitosan beads
NOPR - NISCAIR Online Periodicals Repository
View Archive InfoField | Value | |
Title |
Removal of trivalent and pentavalent arsenic from water using chemically modified chitosan beads
|
|
Creator |
Singh, Ashutosh Kumar
Kumar, Saurav Kumar, Neeraj Singh, A R Shukla, S P |
|
Subject |
Adsorption capacity
Arsenic Chitosan beads Fe-Mn binary oxide Removal efficiency |
|
Description |
479-487
A novel process for chemical modification of chitosan with iron oxide and potassium permanganate was developed and the beads of the modified material have been prepared for the removal of the two forms of the metalloid Arsenic - As(III) and As(V)from water in the concentration range 5-40 mg L-1. The maximum adsorption capacity (pH 7.0) is 43.28 and 32.26 mg g-1 for As(III) and As(V), respectively. The chemically modified chitosan beads are regenerated for successive treatment cycles through alkali treatment. The regenerated beads show negligible loss in their removal efficiency of As(III) and As(V). Overall, the study provides a novel process for fabrication of low-cost composite material of chitosan for enhanced removal of Arsenic. This report will facilitate the development and up-scaling of low-cost treatment technologies for adsorptive removal of Arsenic from water. |
|
Date |
2021-02-02T07:20:41Z
2021-02-02T07:20:41Z 2020-11 |
|
Type |
Article
|
|
Identifier |
0975-0991 (Online); 0971-457X (Print)
http://nopr.niscair.res.in/handle/123456789/56077 |
|
Language |
en_US
|
|
Rights |
CC Attribution-Noncommercial-No Derivative Works 2.5 India
|
|
Publisher |
NISCAIR-CSIR, India
|
|
Source |
IJCT Vol.27(6) [November 2020]
|
|