Record Details

<strong>Growth kinetics of Fe<sub>2</sub>B layers formed on the AISI 4150 steel by different approaches</strong>

Online Publishing @ NISCAIR

View Archive Info
 
 
Field Value
 
Authentication Code dc
 
Title Statement <strong>Growth kinetics of Fe<sub>2</sub>B layers formed on the AISI 4150 steel by different approaches</strong>
 
Added Entry - Uncontrolled Name Zuno-Silva, Jorge ; Autonomous University of Hidalgo State, Escuela Superior de Ciudad Sahagún-Mechanical Engineering, Carretera Cd. Sahagún-O tumba s/n, Zona Industrial CP. 43990, Hidalgo, México
Keddam, Mourad ; Laboratory of Materials Technology, Faculty of Mechanical Engineering and Process Engineering, USTHB, B.P. No. 32, 16111 El-Alia, Bab-Ezzouar, Algiers, Algeria
Ortiz-Domínguez, Martin ; Autonomous University of Hidalgo State, Escuela Superior de Ciudad Sahagún-Mechanical Engineering, Carretera Cd. Sahagún-O tumba s/n, Zona Industrial CP. 43990, Hidalgo, México
Elias- Espinosa, Milton ; Monterrey Institute of Technology and Higher Education-ITESM Campus Santa Fe, Av. Carlos Lazo No. 100, Del. Álvaro Obregón, CP. 01389, México City, México
Arenas-Flores, Alberto ; Materials and Metallurgy Research Center, Autonomous University of Hidalgo State, Ciudad Universitaria Pachuca-Tulancingo km. 4.5, Pachuca, Hidalgo, México
Cervantes-Sodi, Felipe ; Ibero-American University of Mexico City, Department of Physics and Mathematics, Prolongación Paseo de la Reforma 880, Lomas de Santa Fe, CP. 01219, México City, México
Reyes-Retana, José Angel; Monterrey Institute of Technology and Higher Education-ITESM Campus Santa Fe, Av. Carlos Lazo No. 100, Del. Álvaro Obregón, CP. 01389, México City, México
 
Uncontrolled Index Term Incubation time, Diffusion model, Activation energy, Growth kinetics, Integral method
 
Summary, etc. In the present work, the AISI 4150 steel has been pack-borided in the temperature range of 1123-1273 K for a treatmenttime of 2 to 8 h. The mixture of powders containing 20% B4C, 10% KBF4 and 70% SiC has been used for producing a singleboride layer (Fe2B) at the surface of AISI 4150 steel. The presence of Fe2B phase has been confirmed by XRD analysis.The SEM observations have been done to investigate the morphology of boride layers and measure their thicknesses.The cohesion of boride layers has been evaluated by using the Daimler-Benz Rockwell-C indentation technique.The borided sample at 1173 K for 8 h has shown a best cohesion of boride layer to the substrate in comparison to the sampletreated at 1173 K during 2 h. Kinetically, different approaches have been used to estimate the boron diffusion coefficients inthe Fe2B layers and to predict the value of Fe2B layer thickness obtained at 1253 K for a treatment time of 2.5 h. Theestimated values of activation energies for boron diffusion in AISI 4150 steel have been in the range of 193.45 to 199.74 kJmol-1. These values of activation energies have been depended on the diffusion models used. In addition, a good agreementhas been observed between the experimental value of Fe2B layer thickness obtained at 1253 K for 2.5 h with the predictedvalues from these different diffusion models.
 
Publication, Distribution, Etc. Indian Journal of Engineering and Materials Sciences (IJEMS)
2020-08-06 16:02:52
 
Electronic Location and Access application/pdf
http://op.niscair.res.in/index.php/IJEMS/article/view/45937
 
Data Source Entry Indian Journal of Engineering and Materials Sciences (IJEMS); ##issue.vol## 27, ##issue.no## 2 (2020): IJEMS- April 2020
 
Language Note en
 
Terms Governing Use and Reproduction Note Except where otherwise noted, the Articles on this site are licensed under Creative Commons License: CC Attribution-Noncommercial-No Derivative Works 2.5 India © 2015. The Council of Scientific &amp; Industrial Research, New Delhi.