Record Details

Study of cutting ability of centrifugal cast HSS cutting tool in optimized process parameters

NOPR - NISCAIR Online Periodicals Repository

View Archive Info
 
 
Field Value
 
Title Study of cutting ability of centrifugal cast HSS cutting tool in optimized process parameters
 
Creator Mohapatra, Shubhashree
Sarangi, Hrushikesh
Sarangi, Hrushikesh
 
Subject Cutting tool,
Cutting parameters
Taguchi optimization technique
Surface roughness
Form stability
 
Description 198-208
The purpose of the investigation is to propose an innovative method of single point cutting tool development adopting
centrifugal casting operations. Scrapped cutting tools are melted, cast into cylindrical bars adopting centrifugal casting
method, machined for developing single point cutting tools, and heat-treated for the conduct of cutting operations. Adopting
Taguchi optimisation technique and considering the-smaller-the better approach, optimisation of cutting parameters viz,
cutting velocity, depth of cut and feed rate for minimum surface roughness and cutting force are attempted during dry
turning of mild steel (A36). Evaluation of the effect of cutting parameters on the output such as the surface roughness and
the cutting force is done by using ANOVA software. The above mention studies are also repeated with the HSS cutting tool
available in the market (HSS M2). The cutting ability of both tools on the basis of cutting parameters, as mentioned above is
found to be at par. Also, analysis of wear characteristics yielded almost similar results. The study verifies the centrifugal
casting method as a viable method for the development of single point cutting tools using scrapped tools.
 
Date 2021-07-07T04:45:38Z
2021-07-07T04:45:38Z
2021-04
 
Type Article
 
Identifier 0975-1017 (Online); 0971-4588 (Print)
http://nopr.niscair.res.in/handle/123456789/57650
 
Language en
 
Publisher CSIR-NIScPR, India
 
Source IJEMS Vol.28(2) [April 2021]