Record Details

Depth Profiles of Residual Stresses in Inconel 718Machined with Uncoated and Coated Tools<br />

Online Publishing @ NISCAIR

View Archive Info
 
 
Field Value
 
Authentication Code dc
 
Title Statement Depth Profiles of Residual Stresses in Inconel 718Machined with Uncoated and Coated Tools<br />
 
Added Entry - Uncontrolled Name Kosaraju, Satyanrayana ; Department of Mechanical Engineering, Gokaraju Rangaraju Institute of Engineering and Technology, Hyderabad 500 090, India
Nukala, Ravi ; Scientist E, International Advanced Research Centre for Powder Metallurgy and New Materials (ARCI), Hyderabad-500 058, India
T, Karthik Reddy ; Department of Mechanical Engineering, Gokaraju Rangaraju Institute of Engineering and Technology, Hyderabad 500 090, India
K, Raj Kiran ; Department of Mechanical Engineering, Gokaraju Rangaraju Institute of Engineering and Technology, Hyderabad 500 090, India
Saxena, Kuldeep Kr ; Department of Mechanical Engineering, GLA University, Mathura 281 406, India
 
Uncontrolled Index Term mechanical engineering;metallurgical engineering;materials science
Residual stresses, Surface roughness, Temperature, Inconel 718, TiN, Coated tool
 
Summary, etc. Inconel 718 is one of the super-alloy materials, belonging to nickel-chromium alloy family, which has major applications in aerospace sector such as engine parts and turbine components. Durability of these components during engineering performance is affected by residual stresses induced in them in the course of their manufacturing processes. The concept of the present paper is to provide an insight view of induced residual stresses in Inconel 718 work piece, when machined with coated (TiN) and uncoated tools at optimum conditions. For this purpose, turning experiments have been conducted on IN718 material through statistical approach using L9 orthogonal array. Taguchi optimization method is exercised with the emphasis on minimizing the cutting forces resulted during machining. The residual stresses generated in the work piece at the optimum conditions employed for both the tools have been evaluated using XRD method. Conditions such as cutting speed of 60 m/min, feed at 0.068 mm/rev and depth-of-cut of 0.10 mm have been optimized for achieving minimum cutting forces during machining of IN 718 using both coated and uncoated tools. However, tensile stresses on the initial surface layer and compressive stresses in the sub-surface layers are found higher in the work piece material machined with uncoated tool. Surface roughness and temperature developed on the surface of the machined bar are higher in case of uncoated tool than those with coated tool.<br />
 
Publication, Distribution, Etc. Indian Journal of Engineering and Materials Sciences (IJEMS)
2022-03-21 14:38:47
 
Electronic Location and Access application/pdf
http://op.niscair.res.in/index.php/IJEMS/article/view/46019
 
Data Source Entry Indian Journal of Engineering and Materials Sciences (IJEMS); ##issue.vol## 28, ##issue.no## 6 (2021): IJEMS-December 2021
 
Language Note en
 
Nonspecific Relationship Entry http://op.niscair.res.in/index.php/IJEMS/article/download/46019/465547683
http://op.niscair.res.in/index.php/IJEMS/article/download/46019/465547685
http://op.niscair.res.in/index.php/IJEMS/article/download/46019/465547686
http://op.niscair.res.in/index.php/IJEMS/article/download/46019/465547687
http://op.niscair.res.in/index.php/IJEMS/article/download/46019/465547688
http://op.niscair.res.in/index.php/IJEMS/article/download/46019/465547689
 
Terms Governing Use and Reproduction Note Except where otherwise noted, the Articles on this site are licensed under Creative Commons License: CC Attribution-Noncommercial-No Derivative Works 2.5 India © 2015. The Council of Scientific &amp; Industrial Research, New Delhi.