Hardness and corrosion resistance of Zn−Mn/Al<sub>2</sub>O<sub>3</sub> composite coatings produced by electrochemical deposition<br />
Online Publishing @ NISCAIR
View Archive InfoField | Value | |
Authentication Code |
dc |
|
Title Statement |
Hardness and corrosion resistance of Zn−Mn/Al<sub>2</sub>O<sub>3</sub> composite coatings produced by electrochemical deposition<br /> |
|
Added Entry - Uncontrolled Name |
Bucko, Mihael ; University of Defence, Military Academy, 33 Veljka Lukica Kurjaka St, 11000 Belgrade, Serbia Riđošić, Marija ; University of Eastern Sarajevo, Faculty of Technology Zvornik, Republic of Srpska Faculty of Technology and Metallurgy, University of Belgrade, Karnegijeva 4, 11120 Belgrade, Serbia Kovačina, Jovanka ; ICTM-Department of Electrochemistry, University of Belgrade, 11000 Belgrade, Serbia Tomić, Milorad ; University of Eastern Sarajevo, Faculty of Technology Zvornik, Republic of Srpska Bajat, Jelena ; Faculty of Technology and Metallurgy, University of Belgrade, Karnegijeva 4, 11120 Belgrade, Serbia Ministry for Scientific and Technological Development, Higher Education and Information Society, Republic of Srpska ; Ministry of Education, Science and Technological Development of the Republic of Serbia |
|
Uncontrolled Index Term |
materials science; coatings; composite materials Zn alloys, Alumina, Composite materials, Nanoindentation, Corrosion resistance |
|
Summary, etc. |
<p>The aim of this study is development and characterization of the novel Zn-Mn/Al2O3 composite coatings. The coatingswere electrodeposited with constant current density on steel, from chloride solution, without any commercial additives. TheZn−Mn alloy coatings that show high corrosion resistance, may be used in future as an alternative to cadmium coatings.However, the pure Zn and Zn alloy coatings are characterized with poor mechanical properties. Therefore, in this work thealumina particles were incorporated into the Zn-Mn matrix, and the hardness and corrosion resistance of the obtainedcomposite coatings were tested. The mechanical and ultrasound agitation were used to achieve good dispersion of platingsolution and homogeneous co-deposition of second phase. The goal was to examine the effect of the agitation type in bath,on the attributes of the deposited composite coatings. The incorporation of Al2O3 particles was enhanced when themechanical agitation of the solution was applied. However, in case that this agitation method was used, the agglomeration ofthe alumina particles occurred. In contrast, when an ultrasonic agitation of the plating solution was applied, the uniformdistribution of the alumina particles could be achieved. The presence of particles in the matrix, along with appliedultrasound, resulted in grain refinement and homogeneous microstructure. The Al2O3 nanoparticles incorporated in Zn-Mnalloy matrix, resulted in a significant increment in the indentation hardness and a modest increase in the coating corrosionresistance. However, the coating hardness increased with alumina addition, only in case when an ultrasonic agitation of theelectrodeposition solution was used.</p> |
|
Publication, Distribution, Etc. |
Indian Journal of Engineering and Materials Sciences (IJEMS) 2022-08-25 03:20:50 |
|
Electronic Location and Access |
application/pdf http://op.niscair.res.in/index.php/IJEMS/article/view/47785 |
|
Data Source Entry |
Indian Journal of Engineering and Materials Sciences (IJEMS); ##issue.vol## 29, ##issue.no## 4 (2022): IJEMS-AUGUST 2022 |
|
Language Note |
en |
|
Nonspecific Relationship Entry |
http://op.niscair.res.in/index.php/IJEMS/article/download/47785/465554978 http://op.niscair.res.in/index.php/IJEMS/article/download/47785/465554979 http://op.niscair.res.in/index.php/IJEMS/article/download/47785/465554980 http://op.niscair.res.in/index.php/IJEMS/article/download/47785/465554981 http://op.niscair.res.in/index.php/IJEMS/article/download/47785/465554982 http://op.niscair.res.in/index.php/IJEMS/article/download/47785/465554983 http://op.niscair.res.in/index.php/IJEMS/article/download/47785/465554984 http://op.niscair.res.in/index.php/IJEMS/article/download/47785/465554985 http://op.niscair.res.in/index.php/IJEMS/article/download/47785/465554986 http://op.niscair.res.in/index.php/IJEMS/article/download/47785/465554987 http://op.niscair.res.in/index.php/IJEMS/article/download/47785/465554988 http://op.niscair.res.in/index.php/IJEMS/article/download/47785/465554989 http://op.niscair.res.in/index.php/IJEMS/article/download/47785/465554990 http://op.niscair.res.in/index.php/IJEMS/article/download/47785/465554991 http://op.niscair.res.in/index.php/IJEMS/article/download/47785/465554992 http://op.niscair.res.in/index.php/IJEMS/article/download/47785/465554993 http://op.niscair.res.in/index.php/IJEMS/article/download/47785/465554994 http://op.niscair.res.in/index.php/IJEMS/article/download/47785/465554995 |
|
Terms Governing Use and Reproduction Note |
Except where otherwise noted, the Articles on this site are licensed under Creative Commons License: CC Attribution-Noncommercial-No Derivative Works 2.5 India © 2015. The Council of Scientific & Industrial Research, New Delhi. |
|