Record Details

<strong>Experimental investigation of new compound adsorption on carbon steel in 1M HCl</strong>

Online Publishing @ NISCAIR

View Archive Info
 
 
Field Value
 
Authentication Code dc
 
Title Statement <strong>Experimental investigation of new compound adsorption on carbon steel in 1M HCl</strong>
 
Added Entry - Uncontrolled Name Jafari, Hojat ; Department of Chemical Engineering, Shahreza Branch, Islamic Azad University, P.O. Box 311-86145 Shahreza, Iran
Soltanolkottabi, Fariba ; Department of Chemical Engineering, Shahreza Branch, Islamic Azad University, P.O. Box 311-86145 Shahreza, Iran
Behrouzfar, Mohamad Mostafa; Department of Mechanical Engineering, Faculty of Montazeri, Khorasan Razavi Branch, Technical and Vocational University (TVU), Mashhad, Iran
Ameri, Elham ; Department of Chemical Engineering, Shahreza Branch, Islamic Azad University, P.O. Box 311-86145 Shahreza, Iran
Danaee, Iman ; Abadan Faculty of Petroleum Engineering, Petroleum University of Technology, Abadan, Iran
 
Uncontrolled Index Term Adsorption isotherm; Corrosion inhibitor; Corrosion rate; Free energy of adsorption; Ligand; Synergistic effect; Synthesis
 
Summary, etc. <p><span>The effect of new compounds named, 6,6'-(((2,2-dimethylpropane-1,3-diyl)bis(azanediyl))bis(methylene))bis(2- methoxyphenol) (RSH) on the corrosion inhibiting of ST- 37 low carbon steel in 1.0 M HCl has been studied. The inhibitor effects on the corrosion behaviour of the samples have been determined at three different concentrations, 0.5, 1.0, 1.5 and 2.0 mg/L. Weight loss, polarization curves, AC impedance measurements and Atomic Force Microscopy (AFM) have been utilized to study the corrosion behaviour of carbon steel in corrosive environment in the presence and absence of new ligand. Results show that the inhibition occurs through adsorption of the inhibitors molecules on the metal surface. The inhibition efficiency was found to increase with increasing inhibitor’s concentration. Polarization data indicated that this compounds act as mixed-type inhibitors. The corrosion efficiency of RSH at an optimal concentration of 2mg/L is 86. The adsorption of inhibitors follows the Langmuir isotherm. The values of free energy of adsorption in the presence of the corrosion inhibitor are around -32 KJmol-1, which indicate chemiosorption of the molecules. Powerful Atomic Force microscopy is used for the surface morphology studies.</span></p>
 
Publication, Distribution, Etc. Indian Journal of Chemical Technology (IJCT)
2023-01-30 15:34:14
 
Electronic Location and Access application/pdf
http://op.niscair.res.in/index.php/IJCT/article/view/63539
 
Data Source Entry Indian Journal of Chemical Technology (IJCT); ##issue.vol## 30, ##issue.no## 1 (2023): Indian Journal of Chemical Technology
 
Language Note en