Record Details

Manufacturing and Evaluation of Mechanical Properties for Rice Husk ParticleBoard Using IoT

Online Publishing @ NISCAIR

View Archive Info
 
 
Field Value
 
Authentication Code dc
 
Title Statement Manufacturing and Evaluation of Mechanical Properties for Rice Husk ParticleBoard Using IoT
 
Added Entry - Uncontrolled Name Buddi, Tanya ; Department of Mechanical Engineering, GRIET, Bachupally, Hyderabad, Telangana 500090, India
Gogula, Susmitha Valli; Department of Mechanical Engineering, GRIET, Bachupally, Hyderabad, Telangana 500090, India
Saxena, Kuldeep K; Department of Mechanical Engineering, GRIET, Bachupally, Hyderabad, Telangana 500090, India
 
Uncontrolled Index Term Particleboard, Bio-based adhesive, DHT 11, Sensor, Moisture, Temperature
 
Summary, etc. In recent times, different types of particleboards are being preferred in the construction of houses, partitions, furnitureetc. The production of such materials can be manufactured using rice husk, which has been obtained as waste produced inrice millers. Adhesive such as formaldehyde, when exposed to fire, causes toxic flames which are fatal in nature. The basiccondition for production of particleboards is to check the temperature and humidity content in the rice husk which has beendone by using DHT 11 sensors i.e., application of Internet of Thing (IoT) erected method. This identification helps infinding the suitable temperature through which bio-based adhesives have been prepared. In present study, two differenttypes of bio-adhesives namely tamarind with formalin and tamarind with boric acid has been used in manufacturing process.The application of IoT erected method follows a complex preparation method but will partially fulfil the job and reduceshuman involvement. Finally, when the proper temperature and moisture level has been measured, the preparation becomeseasy. After manufacturing the particleboard, the strength has been tested by a three-point bend test and have been comparedwith commercially available boards with formaldehyde base adhesive.
 
Publication, Distribution, Etc. Indian Journal of Engineering and Materials Sciences (IJEMS)
2023-02-24 00:29:07
 
Electronic Location and Access application/pdf
http://op.niscair.res.in/index.php/IJEMS/article/view/70297
 
Data Source Entry Indian Journal of Engineering and Materials Sciences (IJEMS); ##issue.vol## 29, ##issue.no## 6 (2022): IJEMS-DECEMBER 2022
 
Language Note en
 
Terms Governing Use and Reproduction Note Except where otherwise noted, the Articles on this site are licensed under Creative Commons License: CC Attribution-Noncommercial-No Derivative Works 2.5 India © 2015. The Council of Scientific & Industrial Research, New Delhi.