Record Details

Development and validation of an automatic recording microcontroller-based pendulum impact cutter

Indian Agricultural Research Journals

View Archive Info
 
 
Field Value
 
Title Development and validation of an automatic recording microcontroller-based pendulum impact cutter
 
Creator PATEL, ABHISHEK
SINGH, KRISHNA PRATAP
ROUL, AJAY KUMAR
MAHORE, AMAN
NALAWADE, ROHIT DILIP
SINGH, AVESH KUMAR
 
Subject Approach angle, Micro controller, Mechanical property, Rice straw, Shear angle, SMS serrated blade
 
Description Knowledge of rice straw bunch in respect of cutting energy is the important factor for optimization of cutting elements in straw chopping system. A micro controller-based pendulum impact cutter was developed during 2019–21 at the ICAR-Central Institute of Agricultural Engineering, Bhopal, Madhya Pradesh. The system was integrated with load cell, adjustable pendulum arm and adjustable shear and approach angle (0–30 degree) during the cutting experiment. In this study, straw bunch cutting energy at the lowest point of Node 3 was examined which is just above the ground surface. Three type of blades SMS serrated, cutter bar and SMS plain blade were used to determine cutting energy. In order to determine the cutting energy requirement of straw bunch, the mechanical and physical properties of straw were determined. The results represent that the cutting force was significantly affected by blade type, shear angle and approach angle. The minimum cutting energy for SMS serrated, cutter bar and SMS plain blade was registered as 120, 189 and 243 J, respectively among all combinations of shear and approach angle. Developed recording type pendulum impact cutter was compared with the traditional method at selected combination of shear and approach angle for all the three blades and the relative error was recorded between 4–6%. It was concluded that with increasing approach angle at constant shear angle the cutting force initially decreased up to 20 degree and rapid increase from 20 to 30 degree of approach angle. Consequently, the SMS serrated blade emerges as the preferred choice for the rotary impact cutter development, showcasing the potential of this research in advancing straw chopping technology.
 
Publisher Indian Council of Agricultural Research
 
Date 2023-12-19
 
Type info:eu-repo/semantics/article
info:eu-repo/semantics/publishedVersion
 
Format application/pdf
application/pdf
 
Identifier https://epubs.icar.org.in/index.php/IJAgS/article/view/141548
10.56093/ijas.v93i12.141548
 
Source The Indian Journal of Agricultural Sciences; Vol. 93 No. 12 (2023); 1356–1361
2394-3319
0019-5022
 
Language eng
 
Relation https://epubs.icar.org.in/index.php/IJAgS/article/view/141548/53438
https://epubs.icar.org.in/index.php/IJAgS/article/view/141548/53439
 
Rights Copyright (c) 2023 The Indian Journal of Agricultural Sciences
https://creativecommons.org/licenses/by-nc-sa/4.0