Record Details

Woven face mask made from CoolMax fibres with three layers

NOPR - NISCAIR Online Periodicals Repository

View Archive Info
 
 
Field Value
 
Title Woven face mask made from CoolMax fibres with three layers
 
Creator Mohammad, Mujallid Rasha Samer
 
Subject CoolMax fibre
Covid-19
Moisture management
Woven face mask
 
Description 379-384
In this research, ten fabric samples of CoolMax have been produced for preparing reusable face masks. The first group of five woven fabric samples has been produced with different fabric structures (plain weave 1/1, basket weave in warp direction, basket weave in both directions, satin 8, and twill 3/1) with both warp and weft yarns having 750 twists/m. The other group of five woven fabric samples is produced with the same fabric structures but by using 850 twists/m for warp and weft. The plain weave 1/1 fabric is treated with a water-repellent finish. The fabric properties, such as anti-bacterial, moisture, and air permeability, have been evaluated. It is observed that the fabric samples produced from CoolMax with twill, basket weave, and satin would be suitable for the inner and middle layer of the face mask, as they absorb droplets, and liquids and prevent bacteria, while the treated plain weave 1/1 fabric with water-repellent finish can be used for the outer layer. The woven face mask with three layers has been evaluated by objective and subjective methods, and the results show that the air permeability is 15.8 cm3/cm2/s, which is good in terms of breathability as compared to a disposable face mask, and withstand 25 cycles of washing for anti-bacterial property. The suggested woven face mask with three layers can reduce the spreading of the infection of COVID-19.
 
Date 2024-10-09T07:00:26Z
2024-10-09T07:00:26Z
2024-09
 
Type Article
 
Identifier 0975-1025 (Online)
http://nopr.niscpr.res.in/handle/123456789/64693
https://doi.org/10.56042/ijftr.v49i3.12517
 
Language en
 
Publisher NIScPR-CSIR, India
 
Source IJFTR Vol.49(3) [September 2024]