Records

Online Publishing @ NISCAIR

View Archive Info

  • » <strong>Corrosion behavior of boride diffusion layer on CoCrMo alloy...
    Arguelles-Ojeda, José Luis; Mechanical Engineering and Management, COARA, Autonomous University of San Luis Potosi, San Luis Potosí, SLP 78 000, Mexico
    Palmerin, Joel Moreno; Metallurgic Engineering, Campus Guanajuato, Division of Engineering (DI), University of Guanajuato, Guanajuato, Guanajuato, 36 020, Mexico
    Robles, Alberto Saldaña; Agricultural Mechanical Engineering, Campus Irapuato-Salamanca, Life Sciences Division (DICIVA), University of Guanajuato, Irapuato, Guanajuato 36 500, Mexico
    Corona-Rivera, Miguel Angel; Chemical Engineering, COARA, Autonomous University of San Luis Potosi, Matehuala, SLP 78 700, Mexico
    Torres, Martin Zapata; Instituto Politécnico Nacional, Research Center for Applied Sciences and Advanced Technology (CICATA-IPN), Mexico City 11500, Mexico
    Herrera, Alfredo Márquez; Agricultural Mechanical Engineering, Campus Irapuato-Salamanca, Life Sciences Division (DICIVA), University of Guanajuato, Irapuato, Guanajuato 36 500, Mexico
    2021-02-02
    View Record | View Original
  • » <strong>A comparative investigation of inter-row delay timing vis-à-vis some rock...
    Rai, Piyush ; Department of Mining Engineering,Indian Institute of Technology (BHU) Varanasi 221 005, India
    2021-02-02
    View Record | View Original
  • » <strong>Vacuum Oxy-nitro carburizing of tool steels: structure and mechanical...
    Nikolova, Maria ; Deptartment of Material Science and Technology, University of Ruse A. Kanchev, 8 Studentska Str., 7017 Ruse, Bulgaria
    Nikolov, Danail ; Deptartment of Material Science and Technology, University of Ruse A. Kanchev, 8 Studentska Str., 7017 Ruse, Bulgaria
    Yankov, Emil ; Deptartment of Material Science and Technology, University of Ruse A. Kanchev, 8 Studentska Str., 7017 Ruse, Bulgaria
    Derin, Bora ; Metallurgical and Materials Engineering Department, Istanbul Technical University, 34469 Maslak, Istanbul, Turkey
    Topalski, Slavcho ; Fraunhofer Institute for Material and Beam Technology, IWS, Dortmunder Oberflächen Centrum DOC, 44145 Dortmund, Germany
    2021-02-02
    View Record | View Original
  • » <strong>GGBFS &amp; M-sand impact on workability and strength properties of...
    Subramanian, Nagajothi ; School of Civil Engineering, Vellore Institute of Technology, Chennai Campus, Chennai 600127, India
    Solaiyan, Elavenil ; School of Civil Engineering, Vellore Institute of Technology, Chennai Campus, Chennai 600127, India
    2021-02-02
    View Record | View Original
  • » <strong>Effect of alumina impurity on microstructure and properties of alumina...
    Dandapat, Nandadulal ; Bio-ceramics and Coating Division, CSIR- Central Glass and Ceramic Research Institute, Kolkata 700 032, India
    Ghosh, Sumana ; Bio-ceramics and Coating Division, CSIR- Central Glass and Ceramic Research Institute, Kolkata 700 032, India
    Ghosh, Sumana ; Bio-ceramics and Coating Division, CSIR- Central Glass and Ceramic Research Institute, Kolkata 700 032, India
    2021-02-02
    View Record | View Original
  • » <strong>Relationship between the late-age hydration and strength development of...
    Fanghui, Han ; Beijing Key Laboratory of Urban Underground Space Engineering, Department of Civil Engineering,University of Science & Technology Beijing, Beijing, China
    Xuan, Zhang ; Beijing Key Laboratory of Urban Underground Space Engineering, Department of Civil Engineering,University of Science & Technology Beijing, Beijing, China
    Juanhong, Liu ; Beijing Key Laboratory of Urban Underground Space Engineering, Department of Civil Engineering,University of Science & Technology Beijing, Beijing, China
    2021-02-02
    View Record | View Original
  • » <strong>Microstructure, texture, and mechanical properties of two-pass extruded...
    Li, Ruihong ; School of Materials and Metallurgy, Inner Mongolia University of Science and Technology,7Arden Street, Baotou 014010,China
    Jiang, Bin ; College of Materials Science and Engineering, Chongqing University, Chongqing 400044, China
    Chen, Zhijun ; The tenth sub-company, Inner Mongolia First Machinery Group Corporation, Baotou 014030, China
    Pan, Fusheng ; College of Materials Science and Engineering, Chongqing University, Chongqing 400044, China
    Zhang, Xiaomei ; Quality Management Department, Inner Mongolia First Machinery Group corporation, Baotou 014030, China
    2020-08-06
    View Record | View Original
  • » <strong>The effect of CFRP strengthening on the behavior of deficient steel beams...
    Keykha, Amir Hamzeh; Department of Civil Engineering, Zahedan Branch, Islamic Azad University, Zahedan, Postal Code 9816743545, Iran
    2020-08-06
    View Record | View Original
  • » <strong>Effect of material and machining features in electric discharge machining...
    Prakash, Kumarasamy Soorya; Mechanical Engineering, Anna University Regional Campus, Coimbatore 641 046, India
    Gopal, Pudhupalayam Muthukutti; Mechanical Engineering, Karpagam Academy of Higher Education, Coimbatore 641 021, India
    Rahul, Raghavan Nair; Mechanical Engineering, Musaliar College of Engineering and Technology, Kerala 689 653, India
    2020-08-06
    View Record | View Original
  • » <strong>Composite building materials from natural fibers/ agro-forest...
    Singh, Richa ; Polymers, Plastics & Composites Division, CSIR-Central Building Research Institute, Roorkee–247667, India
    Singh, Brajeshwar ; Polymers, Plastics & Composites Division, CSIR-Central Building Research Institute, Roorkee–247667, India
    Gupta, Manorama ; Polymers, Plastics & Composites Division, CSIR-Central Building Research Institute, Roorkee–247667, India
    Tarannum, Hina ; Department of Chemistry, Taibah University, Yanbu, KSA
    2020-08-06
    View Record | View Original
  • » <strong>Additive manufacturing of composite materials by FDM technology: A...
    Mazurchevici, Andrei Danut; Gheorghe Asachi, Technical University of Iasi, Blvd Mangeron No. 59A, 700050, Iasi, Romania
    Nedelcu, Dumitru ; Gheorghe Asachi, Technical University of Iasi, Blvd Mangeron No. 59A, 700050, Iasi, Romania
    Popa, Ramona ; Gheorghe Asachi, Technical University of Iasi, Blvd Mangeron No. 59A, 700050, Iasi, Romania
    2020-08-06
    View Record | View Original
  • » <strong>Excellence of Al-metal matrix composite fabricated by gas injection...
    Kataria, Mukul ; Department of Mechanical Engineering, Gautam Buddha University, Greater Noida, Uttar Pradesh, 201308, India
    Mangal, Sanjay Kumar; Department of Mechanical Engineering, Punjab Engineering College, Chandigarh,160012, India
    2020-08-06
    View Record | View Original
  • » <strong>Growth kinetics of Fe<sub>2</sub>B layers formed on the AISI...
    Zuno-Silva, Jorge ; Autonomous University of Hidalgo State, Escuela Superior de Ciudad Sahagún-Mechanical Engineering, Carretera Cd. Sahagún-O tumba s/n, Zona Industrial CP. 43990, Hidalgo, México
    Keddam, Mourad ; Laboratory of Materials Technology, Faculty of Mechanical Engineering and Process Engineering, USTHB, B.P. No. 32, 16111 El-Alia, Bab-Ezzouar, Algiers, Algeria
    Ortiz-Domínguez, Martin ; Autonomous University of Hidalgo State, Escuela Superior de Ciudad Sahagún-Mechanical Engineering, Carretera Cd. Sahagún-O tumba s/n, Zona Industrial CP. 43990, Hidalgo, México
    Elias- Espinosa, Milton ; Monterrey Institute of Technology and Higher Education-ITESM Campus Santa Fe, Av. Carlos Lazo No. 100, Del. Álvaro Obregón, CP. 01389, México City, México
    Arenas-Flores, Alberto ; Materials and Metallurgy Research Center, Autonomous University of Hidalgo State, Ciudad Universitaria Pachuca-Tulancingo km. 4.5, Pachuca, Hidalgo, México
    Cervantes-Sodi, Felipe ; Ibero-American University of Mexico City, Department of Physics and Mathematics, Prolongación Paseo de la Reforma 880, Lomas de Santa Fe, CP. 01219, México City, México
    Reyes-Retana, José Angel; Monterrey Institute of Technology and Higher Education-ITESM Campus Santa Fe, Av. Carlos Lazo No. 100, Del. Álvaro Obregón, CP. 01389, México City, México
    2020-08-06
    View Record | View Original
  • » <strong>Machining performance enhancement of EN-31 diesteel using MWCNT mixed...
    Bajaj, Rajesh ; Department of Mechanical Engineering, Indian Institute of Technology (ISM), Dhanbad 826004, India
    Dixit, Amit Rai; Department of Mechanical Engineering, Indian Institute of Technology (ISM), Dhanbad 826004, India
    Tiwari, Arun Kumar; Department of Mechanical Engineering, Institute of Engineering and Technology, Lucknow 226021, India
    Chauhan, Nitin Kumar; Department of Mechanical Engineering, JSS Academy of Technical Education, Noida 201301, India
    2020-08-06
    View Record | View Original
  • » <strong>Influence of micro-structural parameters on fatigue life of discontinuous...
    Tevatia, Abhishek ; Department of Mechanical Engineering, Netaji Subhas University of Technology, Dwarka, New Delhi – 110078, India
    Srivastava, Sunil Kumar; Mechanical Engineering Department, Madan Mohan Malaviya University of Technology, Gorakhpur, Uttar Pradesh 273 010, India
    2020-08-06
    View Record | View Original
  • » <strong>Ductile fracture and microstructure of a bearing steel in hot...
    Huo, Yuanming ; School of Mechanical and Automotive Engineering, Shanghai University of Engineering Science, Shanghai 201620, China
    He, Tao ; School of Mechanical and Automotive Engineering, Shanghai University of Engineering Science, Shanghai 201620, China
    Xue, Yong ; School of Material Science and Engineering, North University of China, Taiyuan 030051, China
    Shen, Menglan ; School of Mechanical and Automotive Engineering, Shanghai University of Engineering Science, Shanghai 201620, China
    Yang, Wanbo ; School of Mechanical and Automotive Engineering, Shanghai University of Engineering Science, Shanghai 201620, China
    Hu, Yujia ; School of Mechanical and Automotive Engineering, Shanghai University of Engineering Science, Shanghai 201620, China
    2020-08-06
    View Record | View Original
  • » <strong>Effect of surface mechanical attrition on microstructure and mechanical...
    Tadge, Prashant ; Department of Materials Science & Metallurgical Engineering, Maulana Azad National Institute of Technology, Bhopal 462003, India
    Sasikumar, Chandrabalan ; Department of Materials Science & Metallurgical Engineering, Maulana Azad National Institute of Technology, Bhopal 462003, India
    2020-08-06
    View Record | View Original
  • » <strong>Effect of Nano-Silica on the Physical, Mechanical and Thermal Properties...
    Varghese, Marina Leyan; Department of Civil Engineering, AmalJyothi College of Engineering, Koovapally P.O, Kanjirapally686518, India
    Babu, Richu John; Department of Mechanical Engineering, AmalJyothi College of Engineering, Koovapally P.O, Kanjirapally 686518, India
    R, Suraj Menon; Department of Civil Engineering, AmalJyothi College of Engineering, Koovapally P.O, Kanjirapally686518, India
    Rajan, Reny ; Department of Civil Engineering, AmalJyothi College of Engineering, Koovapally P.O, Kanjirapally686518, India
    Gopal, Vinayak Venu; Department of Civil Engineering, AmalJyothi College of Engineering, Koovapally P.O, Kanjirapally686518, India
    Jacob, Ancheli Siby; Department of Civil Engineering, AmalJyothi College of Engineering, Koovapally P.O, Kanjirapally686518, India
    Titus, Vinny Ann; Department of Civil Engineering, AmalJyothi College of Engineering, Koovapally P.O, Kanjirapally686518, India
    Mathew, Mini ; Department of Civil Engineering, AmalJyothi College of Engineering, Koovapally P.O, Kanjirapally686518, India
    George, Soney Chathukulam; Department of Basic Sciences, AmalJyothi College of Engineering, Koovapally P.O, Kanjirapally 686518, India
    2020-08-06
    View Record | View Original
  • » <strong>Multifactor optimization for development of hybrid aluminium matrix...
    Singh, Swarndeep ; Department of Technical Education and Industrial Training (IT-wing), Punjab-160036, India
    Singh, Rupinder ; Department of Production Engineering Guru Nanak Dev Engineering College, Ludhiana-141006, India
    Gill, Simranpreet Singh; Department of Mechanical Engineering, Beant College of Engineering and Technology, Gurdaspur-143521, India
    2020-08-06
    View Record | View Original
  • » <strong>Tribological investigation of HVOF-spray...
    Sharma, Mithlesh ; Mechanical Engineering Department, I. K. Gujral Punjab Technical University, Kapurthala 144603, India
    Goyal, Deepak Kumar; Mechanical Engineering Department, I. K. Gujral Punjab Technical University, Main Campus, Kapurthala 144603, India
    Kaushal, Gagandeep ; Mechanical Engineering Department, Yadavindra College of Engineering, Punjabi University Guru Kashi Campus, Talwandisabo, Bhatinda 151302, India
    2020-08-06
    View Record | View Original
  • » <strong>Experimental determination of residual flexural strength and critical...
    Aslan, Züleyha ; Department of Mechanical Engineering, Sivas Cumhuriyet University, Sivas 58140, Turkey
    Kiratli, Sakine ; Department of Mechanical Engineering, Çankırı Karatekin University, Çankırı 18100, Turkey
    2020-08-06
    View Record | View Original
  • » <strong>Optimization and investigation of process parameters in single point...
    Kumar, Ajay ; Department of Mechanical Engineering, Faculty of Engineering and Technology, Shree Guru Gobind Singh Tricentenary University, Gurugram, 122505, Haryana, India
    Gulati, Vishal ; Department of Mechanical Engineering, Guru Jambheshwar University of Science & Technology, Hisar 125001, Haryana, India
    2020-08-06
    View Record | View Original
  • » <strong>Anchoring the CFRP strengthening of concrete bridge decks: A comparison...
    Shuai, Tian ; School of Civil Engineering, Liaoning University of Science and Technology, Anshan 114051, China
    Zhenkun, Miao ; School of Civil Engineering, Liaoning University of Science and Technology, Anshan 114051, China
    Bo, Sun ; School of Civil Engineering, Liaoning University of Science and Technology, Anshan 114051, China
    2020-08-06
    View Record | View Original
  • » <strong>Fabrication of prototype connecting rod of PLA plastic material using FDM...
    Maurya, Nagendra Kumar; Department of Mechanical Engineering, G.L Bajaj Institute of Technology & Management, Greater Noida 201310, India
    Rastogi, Vikas ; Department of Mechanical Engineering, Delhi Technological University, New Delhi 110 042, India
    Singh, Pushpendra ; Department of Mechanical Engineering, Delhi Technological University, New Delhi 110 042, India
    2020-08-06
    View Record | View Original
  • » <strong>Influence of bearing raceway surface topography on the level of generated...
    Zmarzły, Paweł ; Department of Mechanical Engineering and Metrology, Kielce University of Technology, Tysiąclecia Państwa Polskiego 7, 25-314 Kielce, Poland
    2020-08-06
    View Record | View Original
3476 - 3500 of 6862 Items    << < 135 136 137 138 139 140 141 142 143 144 > >>